Seeking a Source of M 10 Nuts .

**DSEL74** · 8th July 2015, 07:37 PM

One spanner hanging next to a machine that "fits all" sounds very logical to me!

**pipeclay** · 8th July 2015, 07:44 PM

I was thinking more pedantic.
To each his own!

**BobL** · 8th July 2015, 07:45 PM

Bob- have you got some phosphoric.

Instead of buying Ranex at the hardware look for Chemtec Phosphoric - its a bit cheaper a a fair bit stronger.
It also has less detergent in it so the finish is not quite as cruddy.

**Anorak Bob** · 8th July 2015, 07:54 PM

Originally Posted by BobL

Bob- have you got some phosphoric.

Instead of buying Ranex at the hardware look for Chemtec Phosphoric - its a bit cheaper a a fair bit stronger.
It also has less detergent in it so the finish is not quite as cruddy.

Can you suggest a local supplier Bob?

**BobL** · 8th July 2015, 08:50 PM

Originally Posted by Anorak Bob

Can you suggest a local supplier Bob?

http://www.bunnings.com.au/chemtech-...mover_p1107356

**janvanruth** · 8th July 2015, 10:35 PM

the fluid cleaning companys use for toilets usually contains phosphoric acid, in europe a lot of fluids for the same application for home use do to

Thread: Seeking a Source of M 10 Nuts .

Thread Tools

Search Thread

Similar Threads

Mobil Velocite Nr 4 - seeking an Australian source

Where to buy M16 T-Nuts?

Opposing toothed "Clutch-Plate" Nuts? (a bit like "Castle" Nuts...)

Hide Glue source in Melb (or any cheap source)

Tags for this Thread

Posting Permissions