Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Shaper pics
-
13th December 2019, 03:20 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
Shaper pics
SAM_0555.jpgSAM_0556.jpgSAM_0554.jpgJust a few shaper pics of extra's on my CMZ450.
The first 2 pics show the clapper retract mechanism. The rod ends allow it to operate with the tool head swiveled up to about 20 deg. It only gives me grief when lube oil gets on the SS rubbing strip. For keyslots I lock up the clapper with a grub screw on the operators side of the tool head. The last pic is of the box around the vice. It stops the swarf flying about the shop and fit most jobs. It simply slips under the vice with locating blocks that slide in the tee slots. The panel between the vice and shaper frame just drops in on 2 spigots. Quick to clean it saves a lot of time.
Attached Images
- SAM_0555.jpg (190.3 KB)
- SAM_0556.jpg (186.3 KB)
- SAM_0554.jpg (202.4 KB)
Read the full thread at metalworkforums.com...
-
13th December 2019 03:20 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
A Shaper thought from a non-shaper owner
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 23rd December 2018, 08:30 PM -
Where to get shaper cutters from for Jet jws18ho shaper
By Marcus79 in forum WOODWORK - GENERALReplies: 6Last Post: 21st October 2015, 10:05 PM -
New Shaper
By Oldneweng in forum METALWORK FORUMReplies: 67Last Post: 2nd March 2014, 08:12 PM