Thanks: 
Likes: 
Needs Pictures: 
Picture(s) thanks:
Results 1 to 7 of 7
Thread: My first shaper project
-
28th December 2013, 09:03 AM #1
future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
My first shaper project
Yesterday I made an indicator holder for my lathe on my shaper
we stated with a piece of aluminium, I roughed out the centre on the mill and cut the dovetails with the shaper. I used my bandsaw to remove the excess material then cleaned it up on the shaper and made some brass locking screws.BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
28th December 2013 09:03 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th December 2013, 09:28 AM #2
Blacksmith, Cabinetmaker, Machinist, Messmaker
- Join Date
- Dec 2011
- Location
- Canberra
- Age
- 40
- Posts
- 4,467
The shaper looks great Andre, well done
Have you got a pic of the finished product, or where you are up to with it?
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
28th December 2013, 09:38 AM #3
future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Here are the finished pictures. Ps ew I am going to Canberra in the new year I can deliver....
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
28th December 2013, 09:48 AM #4
Blacksmith, Cabinetmaker, Machinist, Messmaker
- Join Date
- Dec 2011
- Location
- Canberra
- Age
- 40
- Posts
- 4,467
Nicely done, I have just been using my mag base on the antrac, since the leadscrew is so worn the dial grads are not consistent. I had not considered doing what you have done, will have to look into whether i have enough space.
Originally Posted by welder
Meeting up sounds good, let me know when and we can t something up.
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
28th December 2013, 09:55 AM #5
GOLD MEMBER
- Join Date
- Mar 2011
- Location
- Dural NSW
- Age
- 82
- Posts
- 1,120
Shaper Operating
Andre
Good to see that Shaper now in operation.
Nice work on the dovetails.
Shapers are great for this type of work.
Well done.
Happy 2014 to you & your family.
regards
Bruce
-
28th December 2013, 04:01 PM #6
GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 64
- Posts
- 3,566
Any reason why you didn't reduce the thickness of where the indicator fits through your block?
Is this used from the get go or after you have already rough machined the OD.
If its used after the OD has been machined how did you work out how far to move it the 1st time when machining the OD?
-
28th December 2013, 10:05 PM #7
SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Ballarat
- Age
- 65
- Posts
- 2,659
Great work Andre,
Feels good to make something that works
Especially on the shaper
. Well done
Phil
Similar Threads
-
So I Want to buy a Shaper...
By GordoB91 in forum METALWORK FORUMReplies: 11Last Post: 13th June 2013, 08:10 PM -
Now this is a shaper
By Dave J in forum METALWORK FORUMReplies: 19Last Post: 8th June 2013, 12:18 PM -
Shaper vice project
By welder in forum METALWORK FORUMReplies: 49Last Post: 19th June 2012, 08:42 PM -
project for a shaper
By welder in forum METALWORK FORUMReplies: 9Last Post: 24th December 2010, 06:48 PM -
Another project from the old Incra project book
By MichaelP in forum INCRA JIGSReplies: 2Last Post: 10th April 2008, 08:18 AM
