Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
23rd December 2018, 08:30 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,455
A Shaper thought from a non-shaper owner
Shaper vices are one of those things that seem to be stripped from machines very readily so when the machine is sold, sometimes it has a vice and sometimes it does not.
Can I suggest that those of you with shapers post photos of them and (if possible) some dimensioned sketches/drawings so that members looking for them (or other going through second hand shops) can recognise and get the vice they crave?
The dimensioned sketch is because sooner or later I think we will be at a stage where the only way to get a 'genuine' shaper vice of the same brand as the shaper may be to recreate one (that is, get casting made and machine as per the original).
Michael
Read the full thread at metalworkforums.com...
-
23rd December 2018 08:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Where to get shaper cutters from for Jet jws18ho shaper
By Marcus79 in forum WOODWORK - GENERALReplies: 6Last Post: 21st October 2015, 10:05 PM -
Shaper new for me
By argeng in forum METALWORK FORUMReplies: 15Last Post: 19th March 2014, 10:53 AM -
New Shaper
By Oldneweng in forum METALWORK FORUMReplies: 67Last Post: 2nd March 2014, 08:12 PM -
Shaper
By Anorak Bob in forum METALWORK FORUMReplies: 43Last Post: 19th March 2011, 10:18 PM -
TOS shaper
By Bryan in forum METALWORK FORUMReplies: 91Last Post: 16th March 2011, 05:58 PM