Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: shim stock
-
6th September 2013, 03:14 AM #1future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
shim stock
I am starting to reassemble my atlas shaper but I cannot find most of the shims for the machine does anyone know where I can get brass shim stock at reasonable prices. I need it in 0.002" '0.005" and 0.010" in 0.002" laminated layers.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
6th September 2013 03:14 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
6th September 2013, 06:59 AM #2SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Ballarat
- Age
- 65
- Posts
- 2,659
Hi Andre,
I hope you mean reassemble and not resemble even though it happens to all of us at some stage.
Brass shim stock can normally be found at bearing shops as well as places like Blackwoods and Thomas Warburton.
Pretty much any engineering supplies will stock it. Even our nuts and bolts place sells it here.
Good news that reassembly has started, won't be long before the short and curlies are flying all over the place
Phil
ps Congratulations on crackin' 1000 posts
-
6th September 2013, 08:58 AM #3
Hi Andre,
Brass shim is always more expensive than steel shim. Does it need to be brass?
Cheapest brass pack i have seen is here Shim Brass Assortment 6 Sheets X 150mm X 150mm 05mm 25mm Thick Champion | eBay
Steel should be a fair bit less.
Cheers,
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
6th September 2013, 10:23 AM #4GOLD MEMBER
- Join Date
- Mar 2011
- Location
- Dural NSW
- Age
- 82
- Posts
- 1,120
Similar Threads
-
Does anyone need any spring steel shim?
By Michael G in forum METALWORK FORUMReplies: 7Last Post: 19th May 2013, 03:18 PM -
Brass shim material
By ClintO in forum WOODWORK - GENERALReplies: 13Last Post: 9th August 2012, 05:12 PM -
How do you make a 0.5mm shim
By Dengue in forum HAND TOOLS - POWEREDReplies: 9Last Post: 2nd January 2010, 07:06 PM -
shim stock
By alfawolf in forum METALWORK FORUMReplies: 3Last Post: 11th September 2006, 05:48 PM -
Head Stock & Tail Stock extention plates
By Babytoolman in forum WOODTURNING - GENERALReplies: 0Last Post: 25th December 2005, 11:37 AM