Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: shim stock
-
11th September 2006, 03:03 PM #1New Member
- Join Date
- Sep 2006
- Location
- sydney
- Posts
- 1
shim stock
Hi, I'm an absolute beginner to metalwork. I need some patient guidance for the use of shim stock if anybody knows how to use this stuff please. First, where can I get some most reasonably costing shim stock from? I just need A4 sized artwork by using shim stock. I need them to be thin enough to cut into a very delicate shapes with a craft knife but still retain the shape. Please help!:confused:
-
11th September 2006 03:03 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
11th September 2006, 04:18 PM #2
Not sure what you mean by shim stock. What sort of material do you want it in. Metal, Plastic, Cardboard etc.
-
11th September 2006, 05:34 PM #3
A4 Size........Hmmm????
I've seen it in Rolls about 150-200mm Wide
In both Brass and Steel.
From Very Very Very Thin to somewhere near 1/2 mm Thick [THIN]
Good Scissors are OK for the Brass;
Aviation Snips for the SteelNavvi
-
11th September 2006, 05:48 PM #4
If you're after something soft, aluminium flashing could be the go.
Available in rolls of various widths & thicknesses, at hardware or plumbing supplies.
Small quantities of shim stock? Cut soft drink cans up.
Cheers................Sean
The beatings will continue until morale improves.
Similar Threads
-
Help! Triangle stock cutter for BALSA
By inflex in forum HOMEMADE TOOLS AND JIGS ETC.Replies: 13Last Post: 16th July 2006, 01:06 PM -
Need help selecting sheet stock for cabinets
By Rembrandt in forum WOODWORK - GENERALReplies: 1Last Post: 24th April 2006, 03:30 PM -
Tablesaw Feeding
By LineLefty in forum SAFETYReplies: 91Last Post: 20th January 2006, 04:37 PM -
Head Stock & Tail Stock extention plates
By Babytoolman in forum WOODTURNING - GENERALReplies: 0Last Post: 25th December 2005, 11:37 AM -
MC900, Head Stock
By Bruce Micheal in forum WOODTURNING - GENERALReplies: 12Last Post: 15th February 2005, 10:39 AM