Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 23
Thread: SHW Mill
-
2nd December 2012, 03:43 PM #1Senior Member
- Join Date
- Mar 2012
- Location
- Trundle NSW
- Posts
- 223
SHW Mill
Time to post some photos. Unfortunately I don't have a digital camera at the moment so they have been taken with my Iphone.
Mark 349.jpgMark 347.jpgMark 334.jpg
The mill is currently been undergoing some restoration. The powertrain and electric clutches where removed and cleaned along with all the internal cavities. Four new toothed belts where replaced. Two of the belts are a little loose so will fabricate some tensioners to improve this. The table will come off and all ways etc cleaned. Then ready to be levelled and bolted down.
I have also taken a few photos of some of the other machines in the shed and will post these in a second post.
-
2nd December 2012 03:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd December 2012, 04:06 PM #2Senior Member
- Join Date
- Mar 2012
- Location
- Trundle NSW
- Posts
- 223
Mark 337.jpgMark 360.jpgMark 358.jpgMark 356.jpgMark 355.jpgMark 352.jpgMark 350.jpgMark 342.jpgMark 341.jpgMark 362.jpg
So here are some pictures of some of the other machines in the shed.
They include a Hulse planer with a 9ft bed, a small 2C SIP jig borer, a Churchill cylindrical grinder, a Cawi spiral drill sharpener, a Kearns D3 horizontal borer, a Simmons microspeed lathe.
Also have a 12 and 24 inch shaper, Archdale radial arm drill, herbert geared head drill, 60T servex press, small, old Pratt and Whitney slotter and a few others. Maybe some photos of these later.
Hope you enjoy
-
2nd December 2012, 04:13 PM #3
Wow....
Wow...what a nice collection! I really don't know what else to say.....i'm a bit speechless.......
Love the size of your chalkboard....
Handlebar Phil said some time back that there is nothing better than watching a shaper....except maybe a shaper with a flat belt drive. I reckon the planer with its flat belt would have to be up there.....1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
2nd December 2012, 04:25 PM #4SENIOR MEMBER
- Join Date
- Apr 2012
- Location
- Healesville
- Posts
- 602
Jeez Mark, you do have some nice toys
Tiz a shame that you don't live next door to me
-
2nd December 2012, 04:40 PM #5SENIOR MEMBER
- Join Date
- Apr 2012
- Location
- Healesville
- Posts
- 602
G/day Mark, the CAWI-SPIR..... has me intrigued ?
What is it used for ? sharpening drills ? and/or ??
-
2nd December 2012, 05:02 PM #6.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
I'll let the rest of them get warmed up over planers and drive belts but that SHW works for me. I just love the way the slotting head's mounted, poised to go!
Neat collection Mark.
BT
-
2nd December 2012, 05:59 PM #7.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,794
I agree, great collection.
Sometimes of these older machines photos look better in B&W (also gets rid of the fluoro colour cast
-
2nd December 2012, 06:01 PM #8Dave J Guest
Nice collection of old machines,
Do you use the machines for work, or is it hobby use?
Dave
-
2nd December 2012, 06:37 PM #9
Collection
and
-
2nd December 2012, 06:50 PM #10Distracted Member
- Join Date
- May 2010
- Location
- Lower Lakes SA
- Age
- 58
- Posts
- 2,557
Drool
-
2nd December 2012, 07:51 PM #11Senior Member
- Join Date
- Mar 2012
- Location
- Trundle NSW
- Posts
- 223
It is used for sharpening drills up to about 2 inches. It has a very complicated eccentric motion that sharpens both sides of the drill point while turning the handle one way. The angles of grind can be changed very easily and it has an attachment for web thinning. Never seen another one.
Mark
-
2nd December 2012, 08:06 PM #12Senior Member
- Join Date
- Mar 2012
- Location
- Trundle NSW
- Posts
- 223
Hi Dave,
Im a farmer and for years have played with stationary engines. Over the years the engines have slowly got bigger ( my biggest is a 1924 67HP Ruston Hornsby single cylinder horizontal open crank that comes in at about 10 tonnes. The muffler weighs more than a tonne!) To have any large items repaired or made in a professional engineering business is either very expensive or they just don't want to know you, so I thought how hard can it be to do it yourself. Over the last few years I have just acquired things as they fall my way. Had many great adventures buying and picking up machines and met a lot of great people. I must admit I didn't realise other people had the same interest in these machines as I have till I came across this forum after seeing a link for the scraping weekend.
I have a good friend who lives about 40km away and he has been a great mentor. Only problem is I am getting more interested in vintage engineering machines and machining than stationary engines these days.
-
2nd December 2012, 09:56 PM #13Dave J Guest
Hi Mark,
It's addictive hobby as you have found out. Some people don't understand our way of thinking about our sheds and tools.
If your into stationary engines you may know Reg Ingal from around Newcastle, he used to travel a lot years ago so you might have come across him in your travels. He also has a simple type website up.
One thing I can tell from your pictures you have a good taste in machines. Look forward to anymore pictures you post of either your machines or your engines.
Dave
-
3rd December 2012, 07:02 AM #14SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Ballarat
- Age
- 65
- Posts
- 2,659
Hi Ewan,
In actual fact, for me, the planer is up up and over. I gottta tell you, that planer would look great in the blacksmiths shop at work
Hi Mark,
in case you didn't know, I have just become your long lost brother. That is one fine collection of machines made all the more appealing by the fact that they don't look like benchtops and covered in 'stuff'.
I am overly jealous.
Phil
-
3rd December 2012, 10:14 AM #15Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
I like the Kearns borer.... A very very handy bit of gear they are..
I am amazed at how much some of these old engines are worth.. I recently went to a clearing sale that had an old pre WW1 Blackstone oil engine... It was 6hp or so from memory...
Mostly seized from decades in the weather, but it sold for $7 250.Light red, the colour of choice for the discerning man.
Similar Threads
-
Selecting a small Mill / Mill/Drill
By Wombat200 in forum METALWORK FORUMReplies: 31Last Post: 15th March 2012, 10:58 PM -
Arboga EM825 mill vs Hercus model 0 mill?
By neksmerj in forum METALWORK FORUMReplies: 23Last Post: 14th May 2011, 03:16 PM -
Face Mill V End Mill
By eskimo in forum METALWORK FORUMReplies: 8Last Post: 31st August 2010, 03:19 AM -
No. 0 Mill Serial Number and Mill at Work Photos
By Anorak Bob in forum THE HERCUS AREAReplies: 1Last Post: 30th December 2008, 03:31 AM -
Comparison Between C.S Mill & Bandsaw Mill
By echnidna in forum SMALL TIMBER MILLINGReplies: 2Last Post: 7th October 2007, 04:26 PM