Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
21st December 2010, 07:22 PM #1.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Simple Drilling Attachment for Mill
A while back, in a show and tell, I included some photos of a drilling attachment that fits the standard vertical head of a Schaublin 13 mill. I offered to produce a drawing of the attachments components for Phillip "Metalman" who thought that it may be a useful, and simple to make, accessory for his similar mill. Attached is a drawing of most of those components.
The design could be modified to suit other machines with a hollow spindle, such as the little Hercus No.0.
Obviously missing from the drawing, if compared to the photos previously published, are the linkage connecting the lever to the end cap casting and the pivoting thrust assembly. The later requires some careful disection to reveal its workings and both will be the subject of another drawing.
What is not revealed in either the drawing or the photos is the perfection of fit acheived by the Swiss makers.
Phillip, an A1 drawing is in tonights mail.
BT
-
21st December 2010 07:22 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
Face Mill V End Mill
By eskimo in forum METALWORK FORUMReplies: 8Last Post: 31st August 2010, 03:19 AM -
No. 0 Mill Serial Number and Mill at Work Photos
By Anorak Bob in forum THE HERCUS AREAReplies: 1Last Post: 30th December 2008, 03:31 AM -
Does anyone know anything about the 'GB Vertical Mill' attachment that sells on eBay?
By Brendan1152 in forum SMALL TIMBER MILLINGReplies: 2Last Post: 14th October 2008, 11:42 PM -
Comparison Between C.S Mill & Bandsaw Mill
By echnidna in forum SMALL TIMBER MILLINGReplies: 2Last Post: 7th October 2007, 04:26 PM