Thanks: 
Likes: 
Needs Pictures: 
Picture(s) thanks:
Results 1 to 11 of 11
-
22nd August 2013, 08:37 AM #1
.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Better Than Sliced Bread - RC's Bandsaw Clamp
I posted this photo in Josh's Deckel thread last night but given that more blokes own horizontal bandsaws than Deckels I though it was worth posting again here.
I was one of the fortunate recipients of Richard's generosity earlier this year when he made and dispersed a number of these clamps to forum members. I wanted to cut a slice off the end of a not too long piece of 87mm diameter cast iron bar. I could not hold it in the saw's vice jaws. But with RC's device in place I could, making me and the young bloke waiting for the slice happy.
Again Richard. Thank you.
BT
-
22nd August 2013 08:37 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
22nd August 2013, 10:31 AM #2
.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,802
Nice clamp
Bob seeing your clean saw reminds me I really do need to attend to mine.
-
22nd August 2013, 06:19 PM #3
GOLD MEMBER
- Join Date
- May 2003
- Location
- Perth WA
- Posts
- 3,784
Bob,
Has the blade worn grooves in the bearings or does your model have guides pressed on the bearing.Cheers,
Rod
-
22nd August 2013, 10:03 PM #4
GOLD MEMBER
- Join Date
- Jan 2011
- Location
- Far West Wimmera
- Age
- 63
- Posts
- 2,765
That is a very new and highly advanced design. The groove is intended to assist with keeping the blade running tru.
Dean
-
22nd August 2013, 10:14 PM #5
GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Sure its not just "crud" built up on the bearing?
Originally Posted by rodm
Stuart
-
22nd August 2013, 10:52 PM #6
GOLD MEMBER
- Join Date
- May 2003
- Location
- Perth WA
- Posts
- 3,784
Stuart,
It needed your 3D Xray vision - I think you have got it with cast iron crud buildup on the bearing.
Cheers,
Rod
-
22nd August 2013, 11:00 PM #7
Blacksmith, Cabinetmaker, Machinist, Messmaker
- Join Date
- Dec 2011
- Location
- Canberra
- Age
- 40
- Posts
- 4,467
I'm going to take on Stuarts Superpowers and disagree, i reckon the bearings are grooved.....
The clamps are brilliant things, i've used mine on a number of occasions. To stop the moving jaw tilting too far and the whole lot wanting to slip sideways, i use a packer at the other end of the clamp.
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
22nd August 2013, 11:02 PM #8
GOLD MEMBER
- Join Date
- Aug 2010
- Location
- Bendigo
- Age
- 72
- Posts
- 1,986
I have the same special bearings on my saw. Took me about 20 years to get them....
Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
22nd August 2013, 11:12 PM #9
.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Sure is. A tenacious paste of cast iron grit and the spray on Trefolex that was on the blade from when I chopped up last weekend's 1045. Shabby housekeeping. Originally Posted by Stustoys
BT
-
22nd August 2013, 11:13 PM #10
GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Originally Posted by Ueee
But if I recall correctly.... BT's saw isnt that old Originally Posted by jhovel
I have the same special bearings on my saw. Took me about 20 years to get them....
Stuart
p.ssssssssss how much for a new set of bearings BT?
-
22nd August 2013, 11:24 PM #11
Blacksmith, Cabinetmaker, Machinist, Messmaker
- Join Date
- Dec 2011
- Location
- Canberra
- Age
- 40
- Posts
- 4,467
Damn......that paste looks really neat, like it is part of the bearing. I should have known...... Originally Posted by Anorak Bob
Sure is. A tenacious paste of cast iron grit and the spray on Trefolex that was on the blade from when I chopped up last weekend's 1045. Shabby housekeeping.
BT
Shabby houskeeping? The pile of swarf is not up to the blade yet. My BS is the one machine i don't really care to keep clean.
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
Similar Threads
-
RC's Bandsaw Clamp - A Belated Thank You
By Anorak Bob in forum METALWORK FORUMReplies: 5Last Post: 28th May 2013, 08:08 PM -
It's the great big bandsaw clamp givaway thread..
By .RC. in forum METALWORK FORUMReplies: 80Last Post: 17th April 2013, 01:11 AM -
Better than Sliced Bread
By MICKYG in forum METALWORK FORUMReplies: 7Last Post: 10th June 2010, 08:29 PM -
new best item since sliced bread
By mkypenturner in forum WOODTURNING - GENERALReplies: 2Last Post: 24th October 2009, 07:27 AM -
Where to get Ply sliced up in Sydney
By timax in forum WOODWORK - GENERALReplies: 2Last Post: 30th May 2008, 10:11 PM
