Thread: spring loaded oilers

Thanks Dave
They make it hard lol. I put two there because I was worried the second one wouldnt work.
A J Reeves
"tools and workshop equipment"
"oil cans & lubricants"

Stuart

Hi all,
I fitted a couple of grease nipples to the table on my mill and bought a small grease gun from supercheap which I modified to hold oil. (I just soldered a plug to the base of the reservoir ) It has plenty of pressure to force the oil between the table and bed. Perhaps a modified nozzle could be fitted to suit the small oilers on the machines.
Regards,
Russell