Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 8 of 8
Thread: Stainless steel hex bar
-
17th February 2008, 10:35 PM #1SENIOR MEMBER
- Join Date
- Sep 2006
- Location
- Australind ,WA
- Age
- 58
- Posts
- 849
Stainless steel hex bar
Anybody know where I can get small lengths( 300mm or so) of s/s metric hex in Australia? I think the sizes I need are 16 mm and 19 mm.
Tried Ebay and Google.
I want to make some filler/ drain plugs for one of my m/bikes and they should fit metric spanners, etc.
Stephen
-
17th February 2008 10:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
17th February 2008, 10:58 PM #2GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 64
- Posts
- 3,566
Hello Stephen if you have too much trouble finding what your after in W.A,I would more than likely be able to source material and get it posted to you.
Short of that can you get hold of some round stock and mill the flats,or use imperial 5/8" is only .004" smaller than 16mm and 3/4" is only .002" smaller ,shouldnt be a great deal of slop for a ring,openender or socket.
Is your main problem material sizes or getting it cut to length.
-
18th February 2008, 02:01 AM #3GOLD MEMBER
- Join Date
- May 2003
- Location
- Perth WA
- Posts
- 3,784
Hi Steve,
BÖHLER-UDDEHOLM are the most likely source in Perth.
cheers,
RodCheers,
Rod
-
18th February 2008, 08:23 AM #4
Offcuts Galore sells offcuts of sheet, rod, tube and bar in various metals including stainless. He tends to list stainless steel using the abbreviation SS and this may explain why you didn't find him on an eBay search.
There is no hex listed at the moment, but the listing tends to be updated once or twice a week, so it pays to keep an eye out. When I buy from him, I tend to buy several pieces of metal of different kinds at once - George (the owner) is happy to combine the postage and the saving becomes quite significant if you have 4 or 5 pieces to buyCheers
Jeremy
If it were done when 'tis done, then 'twere well it were done quickly
-
18th February 2008, 11:56 AM #5SENIOR MEMBER
- Join Date
- Sep 2006
- Location
- Australind ,WA
- Age
- 58
- Posts
- 849
-
20th February 2008, 11:42 PM #6Senior Member
- Join Date
- Feb 2007
- Location
- brisbane
- Posts
- 246
I will second Bohler (www.buau.com.au) as a good source. They are a pretty large outfit.
I was at their Brisbane branch today picking up some 90 & 70mm 1045.
I see a golf ball launcher on my horizon.
Be aware they have minimum sale price of $50 so you will probably need to work out what else you need to get the order value up.
Since you have a lathe there is no doubt there would be other steel you need.
Haven't used Global Metals but they are also in WA
51 Charles Street, Bentley - WA 6102
PO Box 1046, East Victoria Park - WA 6101
T: +61 8 9451 4733
F: +61 8 9451 4755
E: [email protected]Cheers
Craig
Brisbane
-
21st February 2008, 11:50 AM #7SENIOR MEMBER
- Join Date
- Sep 2006
- Location
- Australind ,WA
- Age
- 58
- Posts
- 849
Thanks Hux, I will check them out.
-
21st February 2008, 11:28 PM #8Senior Member
- Join Date
- Jul 2007
- Location
- Perth
- Posts
- 155
Sterob, Another place to try is Prime Steel, Townsend St, Malaga, 92482666 they deal in off cuts of many metals. Not cheap but they will cut to length if req. No connection but do get some stuff from there. Alan.
Similar Threads
-
Stainless Steel or 4140
By Oldhack in forum METALWORK FORUMReplies: 9Last Post: 27th May 2007, 11:23 AM -
Stainless Steel welding
By Clinton1 in forum WELDINGReplies: 15Last Post: 6th April 2007, 01:58 AM -
spring steel or stainless...?
By gratay in forum MUSICAL INSTRUMENTSReplies: 16Last Post: 10th December 2006, 10:00 PM