Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 15 of 35
Thread: Starting a Stent tool grinder.
-
29th April 2014, 09:45 AM #1future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Starting a Stent tool grinder.
Around two years ago Michael G sent me these stent casting, he had already machined the dovetails. So last weekend we finally made a start on it, I have machined most of the spindle and used my little atlas shaper for the first time in vein to machine the spindle casting.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
29th April 2014 09:45 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
29th April 2014, 10:31 AM #2
-
29th April 2014, 10:50 AM #3
Hi Andre,
Good to see some progress, but no 40tpi threads
Its interesting to see you get the pattern of diagonal lines in the finish from the shaper too. I guess its the bull gear teeth leaving their mark?
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
-
29th April 2014, 11:02 PM #4future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Yeah I substituted the 7/16" 40 tpi model engineers for an m12 fine pitch it should work. As for the shaper I don't have any idea
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
26th January 2015, 11:50 PM #5future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
well I pulled the project out of hiatuses, As I have the CVA almost wired up I had a go at cutting the tee slots for the table.They came out okay put I'm not 100% happy but it will do. They are 10 mm tee slots I roughed them out with a nice new 6mm cutter and hacked away with a blunt 10 mm till it was done learnt a lesson in climb vs conventional milling today
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
27th January 2015, 12:02 AM #6GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
Where was the climb milling in the tee slot cutting?
-
27th January 2015, 06:33 AM #7future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
When cutting the initial slot I climb-milled as that didnt work out too well.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
27th January 2015, 08:15 AM #8GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
Still cant see where the climb milling comes into it when cutting a slot.
-
27th January 2015, 09:03 AM #9GOLD MEMBER
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 2,951
Girl, I don't wanna know about your mild-mannered alter ego or anything like that." I mean, you tell me you're, uh, super-mega-ultra-lightning babe? That's all right with me. I'm good. I'm good.
-
27th January 2015, 09:16 AM #10future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Well I don't know boys I might have my terms wrong but when I fed the tee slot cutter in it pulled in and shook the table going one direction but not going the other direction so may be the mill.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
27th January 2015, 12:10 PM #11GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
I would think that there is something either not fitting correctly or your gib may be to loose or you didn't remove backlash.
-
27th January 2015, 12:12 PM #12GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
-
27th January 2015, 01:00 PM #13future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Well now you say this Pipeclay it was most likely was me not taking out the backlash as the problems only ensued in the first 1inch or two of cutting. I only thought climb milling as I was traversing in the direction you would go if using an endmill climbmilling. Does the direction of milling make no difference when cutting with both sides of a cutter ?
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
27th January 2015, 01:33 PM #14GOLD MEMBER
- Join Date
- Jun 2007
- Location
- sydney
- Age
- 65
- Posts
- 3,566
Makes no difference when cutting a slot as one side would be conventional and the opposite climbing.
-
27th January 2015, 01:52 PM #15future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
Cheers pipeclay a wealth of knowledge as usual.
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
Similar Threads
-
Just starting out — advice on basic tool set
By no_signal in forum HAND TOOLS - POWEREDReplies: 11Last Post: 15th July 2013, 02:43 PM -
Tool and Cutter grinder
By 4-6-4 in forum METALWORK FORUMReplies: 2Last Post: 12th October 2011, 11:40 PM -
Tool post grinder
By morrisman in forum METALWORK FORUMReplies: 10Last Post: 23rd July 2011, 08:44 PM -
Tool & Cutter Grinder
By graemet in forum METALWORK FORUMReplies: 14Last Post: 20th November 2009, 08:27 AM -
Starting out - Basic tool set
By Yehuwdiy in forum TOY MAKINGReplies: 4Last Post: 13th July 2008, 04:40 PM