Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 16 to 19 of 19
Thread: More Steam For The Few - V1213
-
14th October 2013, 09:07 PM #16
Fabulous pictures. I agree that you have a knack with subject and composition. I like the light fitting. Shows the era of the fitting but also shows the age represented by its obvious lack of use and the spider web.
Informative and pleasurable.
Thanks Bob.
Dean
-
14th October 2013 09:07 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
14th October 2013, 09:40 PM #17SENIOR MEMBER
- Join Date
- Sep 2011
- Location
- Ballarat
- Age
- 65
- Posts
- 2,659
Absolutely loving this Bob but sometimes I really wish I had the money to get them running again.
Phil
-
14th October 2013, 10:54 PM #18.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
What I found upsetting about the locomotives down in Manjimup and Pemberton was their condition. Funding for preservation would be at best scarce, in the case of both 109s, probably non existant. At least in Manjimup they have roofed structures over the displays. The V1213 is already deteriorating. In stark contrast are the locomotives I saw in Europe - https://www.woodworkforums.com/f65/st...ml#post1443644
There is a railway museum not far from where I live. I will venture there with camera in hand and see whether our rail heritage is fairing any better than what I witnessed a week ago.
BT
-
15th October 2013, 12:52 AM #19
Hi BT,
Thanks for the link, i had not seen that one before. Its so good to see them looked after for the generations to come.
Just imagine the machines they would have used to make them too. No Chinsy imports back then.
Ew1915 17"x50" LeBlond heavy duty Lathe, 24" Queen city shaper, 1970's G Vernier FV.3.TO Universal Mill, 1958 Blohm HFS 6 surface grinder, 1942 Rivett 715 Lathe, 14"x40" Antrac Lathe, Startrite H225 Bandsaw, 1949 Hercus Camelback Drill press, 1947 Holbrook C10 Lathe.
Similar Threads
-
Steam box
By James McKinsey in forum WOODWORK - GENERALReplies: 7Last Post: 25th February 2011, 03:04 PM -
my steam engine
By weisyboy in forum WOODWORK - GENERALReplies: 18Last Post: 29th December 2008, 08:48 PM -
Steam bending ply
By pippa_21 in forum WOODWORK - GENERALReplies: 9Last Post: 18th January 2008, 06:50 PM -
Steam bending
By Bob Hall in forum WOODWORK - GENERALReplies: 0Last Post: 18th September 2007, 06:08 PM