Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: Tailstock Question
-
18th January 2020, 09:30 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,401
Tailstock Question
I am refurbishing a tailstock from a metal work lathe to use it on a wood turning lathe. There is a blind hole in the top of the casting near the barrel clamp, does anyone know what is its purpose? The hole is approximately 10mm in diameter and 16 mm deep, it does not have a thread. Picture 2 is an overall view and the hole in question is the one on the right in the first picture. Thanks for any assistance.
Mm.DSC06314.jpgDSC06219.jpg
Attached Images
- DSC06314.jpg (130.4 KB)
- DSC06219.jpg (106.8 KB)
Read the full thread at metalworkforums.com...
-
18th January 2020 09:30 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Tailstock Design Question
By simonl in forum METALWORK FORUMReplies: 4Last Post: 15th August 2014, 01:21 PM -
I think it needs a new tailstock
By Burner in forum EBAY, GUMTREE, AMAZON (and other sale sites) Metalwork ONLYReplies: 0Last Post: 31st July 2014, 11:56 PM -
Tailstock and Bed
By Auskart in forum THE HERCUS AREAReplies: 7Last Post: 12th August 2012, 10:01 AM -
Tailstock Question
By simonl in forum METALWORK FORUMReplies: 39Last Post: 27th May 2012, 09:00 PM -
Now for the tailstock
By Tiger in forum WOODTURNING - GENERALReplies: 8Last Post: 7th June 2006, 09:50 AM