Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 31 to 35 of 35
Thread: tips for making a barbecue
-
22nd December 2011, 11:32 AM #31SENIOR MEMBER
- Join Date
- Dec 2010
- Location
- Melbourne
- Age
- 79
- Posts
- 601
Nrb
Good to see this issue of steel or stainless has brought out plenty of xmas cheer and good will to all.
Come on guys this is just a matter of opinion ,comments like BS and such---leave it outLast edited by nrb; 22nd December 2011 at 12:03 PM. Reason: additioal comment
-
22nd December 2011 11:32 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
22nd December 2011, 01:40 PM #32GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,751
Sorry if I am confusing Dean,
I have just tried to up load a drawing, to no avail. (Edit: the attachment actually worked) However the two options are as follows:
1. Cut across the flat of the 25 mm RHS so that the cut is 25 mm wide and down both sides of the tube say 5 mm. The distance between the slots in the group can vary, but I would suggest 4 mm. The distance between the groups can also vary, but once again 6 mm plus.
2. Rotate the tube 45 degrees and cut fully down to almost 1/2 way through the RHS ie in effect you are cutting almost fully down two (2) adjacent sides. Distance between cuts as above.
If you are still having problems understanding my ramblings, PM me your phone number and I will call you.
George
-
22nd December 2011, 07:42 PM #33SENIOR MEMBER
- Join Date
- Feb 2010
- Location
- Ballina, NSW
- Posts
- 725
-
23rd December 2011, 08:07 AM #34
-
23rd December 2011, 11:28 PM #35GOLD MEMBER
- Join Date
- Dec 2010
- Location
- Mornington Peninsula
- Posts
- 2,751
Good luck guys.
Similar Threads
-
Tips for making a table
By Corgan in forum METALWORK FORUMReplies: 3Last Post: 23rd April 2011, 07:05 PM -
Barbecue Forks
By Rodgera in forum WOODIES JOKESReplies: 0Last Post: 16th February 2011, 02:29 PM -
Tips for making jewellery
By gonty in forum WOODWORK - GENERALReplies: 0Last Post: 27th April 2009, 03:16 PM -
tax tips
By mako in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 27Last Post: 18th February 2008, 06:53 PM -
More Tips
By mat in forum HINTS & TIPSReplies: 0Last Post: 17th June 2004, 10:27 AM