Needs Pictures: 0
Picture(s) thanks: 0
Results 1,516 to 1,530 of 1690
Thread: todays tools gloat
-
31st July 2014, 12:43 AM #1516GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
I must say I thought they would go for more. But, maybe I'm making the mistake of confusing what people are "asking" for them with what people are "paying" for them.
And of course I now know its all there and working(thought could use a new crystal).. which is always a fingers crossed thing.
Stuart
-
31st July 2014 12:43 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
12th August 2014, 12:11 AM #1517
Had a good weekend, drop into a local garage sale, 3 x dawn 100mm G clamps, 1 x sidchrome/siddons 8 inch adjustable and 1 rivet set all in very good not abused condition for $10
Also scored an 8 inch ryobi bench grinder with good wheels and all its bits for $20, was real dirty but now looks like it just came home from bunnings, will do fine for sharpening.
-
12th August 2014, 02:44 PM #1518
Albrecht drill chuck
While I was in Germany, I picked up a used Albrecht 10mm drill chuck on MT2 arbor in very good condition for Eu10.- posted to my brother's address. Amazingly smooth operation.
IMAG1457.jpgCheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
13th August 2014, 04:34 PM #1519GOLD MEMBER
- Join Date
- Jul 2006
- Location
- Adelaide
- Posts
- 2,680
-
13th August 2014, 08:26 PM #1520
....
got it....Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
17th August 2014, 07:40 PM #1521
I didn't really need a second power hacksaw to go with my 1950's McPherson monster and I probably shouldn't have gone to have a look at it but I succumbed to temptation and it jumped on the back of the truck while I wasn't looking (at least that's what I told the long-suffering Barbara while she was helping me unload it). $80 for this didn't seem too bad http://power hacksaw lotze 3 phase |...s | 1053828242 - it seems to be in good nick, just needs a bit of a clean up. Thanks to Ben for posting it in the EBay thread.
-
17th August 2014, 09:29 PM #1522Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
22nd August 2014, 08:14 AM #1523
An old TOS universal milling machine that came into my possession last night. Included the universal milling head and some tooling.
Seems to be fully functional except for a small electrical issue that I need to resolve.Cheers.
Vernon.
__________________________________________________
Bite off more than you can chew and then chew like crazy.
-
6th September 2014, 10:15 PM #1524Senior Member
- Join Date
- May 2011
- Location
- Castlemaine
- Posts
- 144
Waldown Tool Grinder
The local high school was having a garage sale to clear out some surplus stuff, so I stopped buy. First thing I see when I walk in is a Waldown 7" tool grinder. I already have 3 Waldown grinders, 2 x 8" series II, one for grinding and one for buffing/wire wheel. The third grinder is a 8" series II tool grinder which I am in the middle of rebuilding. So I did didn't really "need" it but it is in pristine condition and the price was to good to pass up at $150 . It does not have any wheels so I will set it up with a std wheel on one end a green wheel or a diamond wheel on the other for carbide.
They where also selling a very good Waldown pedestal drill for $300 but As it was not a morse tapper version I passed it up.
Cheers
Piersimage.jpgimage.jpg
-
8th September 2014, 01:03 AM #1525SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- N.W.Tasmania
- Posts
- 703
-
8th September 2014, 03:16 AM #1526.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
-
8th September 2014, 11:44 PM #1527GOLD MEMBER
- Join Date
- Aug 2011
- Location
- Melbourne
- Posts
- 2,951
-
10th September 2014, 10:32 AM #1528Senior Member
- Join Date
- May 2011
- Location
- Castlemaine
- Posts
- 144
Thanks
Thanks Bob for your generous offer.
I would be very interested in doing a trade as neither of my grinders has a protractor fence and I was planning to make one.
Cheers
Piers
-
19th September 2014, 08:14 PM #1529GOLD MEMBER
- Join Date
- May 2011
- Location
- Murray Bridge SA
- Posts
- 3,339
M&W internal micrometer
Got dragged into a Salvation Army shop today for a look and picked up a Moore and Wright internal micrometer for $15.00. Unfortunately it is missing the 3-4" 6-7" extensions and a couple of other small parts. It's an older model as it is in a tin box with a leather look outside and a dark blue velour finish inside, anyone have an idea as to its vintage, I looked on M&W website but it doesn't show anything except later models. Anyone out there have a similar looking set up that could tell me what is missing please.
Kryn
-
27th September 2014, 03:32 PM #1530
Picked for $20.00
It's my first back plunge indicator, You would think with over 150 dial indicators I would have one, but they just don't seem to become available very often.
This one is as smooth as silk and in fantastic visual condition....Warning Disclaimer
Similar Threads
-
todays job
By watsrags in forum WOODTURNING - PEN TURNINGReplies: 10Last Post: 28th April 2011, 09:56 AM -
todays pieces
By cornucopia in forum WOODTURNING - GENERALReplies: 9Last Post: 21st January 2009, 07:54 PM -
Todays fun...
By Sigidi in forum SMALL TIMBER MILLINGReplies: 13Last Post: 31st August 2008, 01:49 PM -
todays job
By weisyboy in forum SMALL TIMBER MILLINGReplies: 5Last Post: 24th August 2008, 10:34 PM -
todays work
By ss_11000 in forum WOODWORK PICSReplies: 4Last Post: 4th June 2006, 11:26 AM