Needs Pictures: 0
Picture(s) thanks: 0
Results 106 to 120 of 1690
Thread: todays tools gloat
-
23rd January 2012, 03:00 PM #106Dave J Guest
I am interested in the last 2 and maybe the others as well. Pm sent
DaveLast edited by Dave J; 23rd January 2012 at 03:05 PM. Reason: Edit others
-
23rd January 2012 03:00 PM # ADSGoogle Adsense Advertisement
-
23rd January 2012, 03:01 PM #107Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
Time for my tool gloat...
Mizoguchi boring and facing head... 100mm diameter, NT40 arbour..
Seen very very little use, has not been used since the 70's when it was repossessed so I was told and I believe it..
You get a real appreciation for tools when you feel how smooth this is in action.... it is hard to describe but the smoothness is well, smooth..
Came with all accessories too which is a bonus...
Light red, the colour of choice for the discerning man.
-
23rd January 2012, 03:06 PM #108future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
wow that boring head looks like a nice bit of kit
BETTER TO HAVE TOOLS YOU DON'T NEED THAN TO NEED TOOLS YOU DON'T HAVE
Andre
-
23rd January 2012, 03:07 PM #109Dave J Guest
Nice pick up RC.
Will be a handy bit of gear.
I have been keeping my eye out for one, but nothing so far.
Dave
-
23rd January 2012, 03:24 PM #110GOLD MEMBER
- Join Date
- Mar 2011
- Location
- Dural NSW
- Age
- 82
- Posts
- 1,120
Beautiful
RC
Very nice boring head,& meaningful measurements.
One division equals .0005"
I do not have to translate, that figure means something to me.
regards
Bruce
-
23rd January 2012, 04:11 PM #111
Hi .RC,
Nice one, is that an digitally programmed automatic advance, like the Wohlhaupter? (I'm looking at the numbered buttons around the edge)
Regards
Ray
-
23rd January 2012, 04:53 PM #112Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
It is virtually a clone of a Wohlhaupter UPA4.. The instruction manual for the Wohlhaupter works for this boring head..
It has 12 feed rates for facing...Light red, the colour of choice for the discerning man.
-
23rd January 2012, 11:59 PM #113Senior Member
- Join Date
- Mar 2009
- Location
- Blue Mountains
- Posts
- 175
Hi, I have a smaller boring head of the same brand that came with my mill. It is complete except I have no instructions. I paid H & F to photocopy a set of Narex instructions thinking they were the same as mine but no go. Could someone tell me if there is a direct equivalent in the Wholhaupter range please?
Mine is a model MU with an ISO 30 taper, the feed mechanism is different to the one posted by RC. Thanks, Mm.
-
24th January 2012, 05:33 AM #114GOLD MEMBER
- Join Date
- Oct 2010
- Location
- melbourne, laverton
- Posts
- 1,469
-
24th January 2012, 07:28 AM #115Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
That one looks brand new unused.....
From what I can see that is a copy of the Wohlhaupter UPA3. The UPA1, UPA2 and UPA 3 all shared the same set of instructions... I take it yours is a MU3 model?
Here is a link to a thread with some manuals for that series of Wohlhaupter. Unfortunately they are not of the best quality but it gives you something to search for anyway... Wohlhaupter UPA3 manual - Practical Machinist - Largest Manufacturing Technology Forum on the Web
Here is a link to a UPA3 that has some decent photo's to compare to yours
Wohlhaupter UPA3 SK40 Plan- und Ausbohrkopf Ausdrehkopf | eBayLight red, the colour of choice for the discerning man.
-
24th January 2012, 08:47 AM #116.
- Join Date
- Nov 2008
- Location
- Perth WA
- Age
- 71
- Posts
- 5,650
Helllo Phillip,
Do you find the opportunities to use the head restricted due to insufficient vertical clearance on your mill? I'd given up on the UPA-3 and have been looking for a UPA-2. Sadly, the chances of finding one attached to a 30 taper are real slim.
Bob.
-
24th January 2012, 10:10 AM #117future machinist
- Join Date
- Mar 2008
- Location
- nowra
- Posts
- 1,361
-
24th January 2012, 05:56 PM #118Senior Member
- Join Date
- Mar 2009
- Location
- Blue Mountains
- Posts
- 175
Hello R.C.
Thank you very much for posting those links, mine has the markings MU NT 30 on both the box and the unit. I would say it is a close copy of the UPA3 by looking at the instructions and pictures. I did not realise it was so capable. When I got the unit it had one of the supplied tool bits sharpened so it had been used, but not very much at all. I have used it twice, the first time I wanted to machine a taper in piece of 40mm thick aluminium for friends yacht steering mechanism, hence the inquiry to H&F. I ended up doing the 'taper' by making small steps, it was not a critical application but it would have been nice to do it properly just for the sake of being able to do it. Thanks again.
Hello Bob,
As I said above I have not used the unit much so have not (as yet) had any height issues. I am sure they will happen occasionally, especially now that I can use it properly but I can live with that.
Regards, Mm.
-
25th January 2012, 08:39 PM #119Pink 10EE owner
- Join Date
- Aug 2008
- Location
- near Rockhampton
- Posts
- 4,304
Video of the Mizoguchi in action in facing mode
Mizoguchi Boring Facing head - YouTubeLight red, the colour of choice for the discerning man.
-
26th January 2012, 01:04 AM #120GOLD MEMBER
- Join Date
- Jul 2010
- Location
- Melbourne
- Posts
- 7,775
Hi RC,
I want one now, though I doubt I want to pay for one lol
To get these back to the start do you have to run them backwards? or is there some way to get them back faster?
Stuart
Similar Threads
-
todays job
By watsrags in forum WOODTURNING - PEN TURNINGReplies: 10Last Post: 28th April 2011, 09:56 AM -
todays pieces
By cornucopia in forum WOODTURNING - GENERALReplies: 9Last Post: 21st January 2009, 07:54 PM -
Todays fun...
By Sigidi in forum SMALL TIMBER MILLINGReplies: 13Last Post: 31st August 2008, 01:49 PM -
todays job
By weisyboy in forum SMALL TIMBER MILLINGReplies: 5Last Post: 24th August 2008, 10:34 PM -
todays work
By ss_11000 in forum WOODWORK PICSReplies: 4Last Post: 4th June 2006, 11:26 AM