Thread: Need tooling for mill

Hi Antoni and welcome to the forum.

I you think about possibly our members who are normally very helpful, would be even better equipped to assist you if you took that bit extra time in your introduction to us.

Give us some background, on yourself your experience and tell us what sort of mill it is, Ie. brand and model and what you wish to achieve as far as machining on your mill.

In this way you will likely receive many more replies than this one.

Cheers

Grahame

Dean may be able to help you out.

http://myworld.ebay.com.au/hqlsmonaro

Hi all, my name is Antoni (Tony) Worked in print Metal deck industry for
25 years, now doing test & tagg and repairs to ele tools.
Raced power boats had some motor bikes, built cars and boats.
My son is driving one of my boats in the drags now.
Big tools a small AT-280-1 lathe - mill,AB Arboga drill mill.
A lathe, names on plates Bayer motoren werke AG.
Georg Stenzel & co
Werkzeugruasschinen.
The mill Wandere-Werke .AG
Model KFV-207
Made in 1970
I got the mill to deck engines blocks and heads.
It is old cnc not working but been rebuitled now.
will be rewired to run manualy.
Thanks Tony