Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
29th April 2021, 07:40 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,433
Unusual grind shape on new adjustable reamers
I have bought plenty of unbranded cheap adj readers on eBay . From real small To 38 mm I had 3 arrive today in the 13 to 19 range ... upon inspection the blades are not straight sided. Normally regardless of weather they are set in the adjustment range the outer measurement eg 17 mm is consistent from one end to the other when useing calipers. And the Outer edge of each blade is straight .. but this time all three reamers have a dip near the top end. I will try to post a pic
Attached Images
- 35594AF0-FC4D-43B0-B75B-D8382BC407A1.jpg (33.9 KB)
Read the full thread at metalworkforums.com...
-
29th April 2021 07:40 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Reamers
By MWF FEED in forum METALWORK FORUMReplies: 0Last Post: 14th March 2018, 11:10 PM -
Flat Grind Versus Hollow Grind
By NeilS in forum WOODTURNING - GENERALReplies: 69Last Post: 14th December 2012, 09:58 PM -
Adjustable Reamers
By jack620 in forum METALWORK FORUMReplies: 15Last Post: 9th October 2012, 08:35 PM -
where to get reamers etc.
By holmsy2000 in forum METALWORK FORUMReplies: 10Last Post: 16th November 2006, 02:23 AM