Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
-
28th March 2013, 11:26 PM #1
VFD swap wanted - 1.5kW for 2.2kW or bigger
I posted this in the SWAP area, but here might be a better response perhaps?
Just a long shot I suspect, but I have a new 1.5kW (well tested but not used on a machine yet) Huanyang VFD. Yesterday I was given a much more suitable motor for my milling machine - but it is 2.2kW (3HP). I can obviously use the 1.5kW VFD to its current limit (since that is protected, it would be safe to do) and still have the advantage of the bigger torque at low frequencies, but it kind of defeats the extra power available in this motor....
Anyone here NOT likely to upgrade their 2HP motor but has a 3HP (or bigger) VFD they might like to swap mine for? I'd be happy to take a used one in exchange. I was going to offer a price adjustment, but then I saw that the 2.2kW ones are actually CHEAPER than the 1.5kW ones ...Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
28th March 2013 11:26 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
Similar Threads
-
Sydney NSW. Wanted, Someone to build me a dining table! Swap or Pay
By dave73 in forum WOODWORK - GENERALReplies: 8Last Post: 16th March 2013, 11:22 AM