Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: waldown
-
20th April 2015, 08:37 PM #1Novice
- Join Date
- Apr 2014
- Location
- Perth
- Posts
- 18
waldown
hi
how do you get the spindle pulley off a waldown drill
steve
-
20th April 2015 08:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
20th April 2015, 09:32 PM #2Philomath in training
- Join Date
- Oct 2011
- Location
- Adelaide
- Age
- 59
- Posts
- 3,149
Sorry Steve - you asked that before and didn't get much response.
I've just gone out and taken my 3M apart. Once the nut up top is off, the pulley just lifts off.
If yours does not then check that there are no grub screws hidden in the bottom of the grooves.
I'd try some penetrating oil in case there is some thing gummed up, but other than that it would be some gentle pressure with a puller.
Michael
-
20th April 2015, 10:02 PM #3
You may also be able to use something like tyre levers on two opposing sides to get some purchase on a corroded on pulley. But as Michael said, the pulley should just slide off once the 'gunk' has been 'cracked'.
I saw you initial message and suspected that you had figured it out at the next time you looked at it.....Cheers,
Joe
9"thicknesser/planer, 12" bench saw, 2Hp Dusty, 5/8" Drill press, 10" Makita drop saw, 2Hp Makita outer, the usual power tools and carpentry hand tools...
-
21st April 2015, 10:23 AM #4
On mine there is no grub screws, just the top nut. There is a possibility that the key has gotten wedged somehow and is complicating the issue.
…..Live a Quiet Life & Work with your Hands
-
21st April 2015, 01:33 PM #5Novice
- Join Date
- Apr 2014
- Location
- Perth
- Posts
- 18
pulley
hi
now i know where i"am going thanks for all your helpful replys
steve
Similar Threads
-
Waldown vice jaw
By morrisman in forum METALWORK FORUMReplies: 9Last Post: 1st September 2014, 04:56 PM -
What to do with an old Waldown 8SN
By camoz in forum METALWORK FORUMReplies: 4Last Post: 2nd June 2013, 03:41 PM -
Waldown 8S v's 2M?
By camoz in forum METALWORK FORUMReplies: 4Last Post: 28th April 2013, 06:34 PM -
Waldown ..... again
By Anorak Bob in forum METALWORK FORUMReplies: 4Last Post: 14th May 2012, 11:32 AM -
Another Waldown
By Anorak Bob in forum METALWORK FORUMReplies: 5Last Post: 17th September 2011, 12:06 AM