Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 1 of 1
Thread: What did I do wrong?
-
11th October 2021, 02:10 PM #1Most Valued Member
- Join Date
- Aug 2015
- Posts
- 4,432
What did I do wrong?
Hi all,
Using a slitting saw (3-1/2" x 1" 1mm thick and approx 140 teeth) on the mill, conventional milling into aluminium (unknown grade) and doing approx 600 rpm using WD40 generously for lube and chip clearance.
All going reasonably well and the bang!
Spindle stalled and bits of HSS slitting saw shatters and flies in all directions.
I never did trust it and so was wearing a full face shield.
What did I do wrong?
Sent from a galaxy far far away
Read the full thread at metalworkforums.com...
-
11th October 2021 02:10 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Posts
- Many
Similar Threads
-
Wrong wood? Wrong glue? or bit of both.
By orraloon in forum HAND TOOLS - UNPOWEREDReplies: 10Last Post: 5th May 2017, 08:36 PM -
What's wrong with this?
By rsser in forum BANDSAWSReplies: 15Last Post: 1st March 2008, 10:54 PM -
Talk about wrong place at the wrong time....
By silentC in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 8Last Post: 25th October 2005, 11:51 PM