Thread: Zinc shed turned cat enclosure, help needed for insulating and soundproofing

Reece'
For the insulation you could glue polystyrene foam sheet to the inside. Have to use a water based adhesive. You could possibly even use white wood glue or bondcrete. Once the glue has cured you can then paint the foam with a water based paint to seal it.

bollie7

From my experience the generic type paint on insulating coating is next to useless, unless you get the very expensive stuff. Either as Bollie7 suggests or sandwiched batts. Laserlite can be had in varying grades to minimise heat transmission. Shade cloth is good for reducing transmitted summer heat but not much good at reducing radiated heat in winter.

Just dont go too nuts on the laserlite. Just removed the stuff from the roof of a pergola, too hot to sit out there in summer. Perhaps the odd one in the walls will do.

See if you can get some secondhand coolroom panels they
are great for this type of thing, then you wont have to bother
with heat deflecting paint, cats can handle a fairly hot environment
but will need shade on the really hot days and airflow. As far
as the sunlight goes can you add a wire extension.
Here's a pic of my cat enclosure.
Attachment 112265
There's deciduous trees along the edge that give shade
on the hot days, and let the sun in during the winter.

Regards
col.