Thread: Amazing Table saw safety

Originally Posted by rrich

Please understand that there are two actions taking place when the cartrige trips. The first is the aluminum thingie ramming itself into the saw blade. The second action is that the blade is being dropped below the table. I think that the second action prevents the arbour damage that you are concerned with.

IMHO, the saw will not be a viable product until the cartrige is available from a second or third source. (i.e. Similar in concept to generic drugs.) I considered the saw when I purchased my new saw. The cartrige second source was a major issue for me and a left tilt only was the feature that squashed the deal.

There is a whole frame work that holds the arbor and it's bearings. Taking a blade thats spinning at around 3000rpm and stopping it in less than a 1/4 turn will exert an increadible amount of force on that frame and the other parts that hold that frame... You can can't deny that there's going to be some serious amount of flex taking place in the whole mechanism and I doubt things will go back together perfectly afterwards. Most people would be greatful, me included, if the saw self distructed but saved a body part but it would be wishful thinking to expect the saw to ever cut true ever again.