Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 6 of 6

Thread: Block Plane

  1. #1
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default Block Plane

    I am a little embarrassed as to posting what I did but as this is a safety topic I guess I should post to prevent others from doing what I did.

    I was using a Block plane to take off a very fine shaving from a small piece of wood. I just had to take it out of the vice and check it as I went along. Then put it back in the vice and take a couple more shavings.

    I became a little lazy in doing that as I have about 15 pieces to do. So I just swapped to using the block plane in one hand and the piece of wood in the other. Not getting much of a shaving so I used a little more force and sliced a bit of the nail with some skin. Only took a very fine shaving but enough to start the blood flowing. One bandaid was not enough so two were needed and some dry antiseptic powder. Only cut about two or three mills.

    What have I learnt, is to avoid putting your hand near the sole of the block plane. Best to plane with your hands above the sole.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Jan 2008
    Location
    Australia
    Posts
    752

    Default

    Doesn't take much. I have this 3mm cut on the top of my finger from a marking wheel gauge yesterday. Nothing major but a sensitive bit which kept getting in the way today.
    My blog: ~ for the love of wood ~ - http://theloveofwood.blogspot.com/

  4. #3
    Join Date
    Aug 2005
    Location
    Queensland
    Posts
    2,947

    Default

    A not too painful lesson I hope.

    Ensure that absolutely all blood has been removed from your plane or you will have heavy rust in no time.

    Was listening to a designers program on ABC National the other day - talking to a bloke who did some design work for J&J - looked at the band-aid and redesigned it as in most cases it was used on fingers - they apparently moved the gauze towards one end - smart when you think about it.

    Regards,
    Bob

  5. #4
    Join Date
    Nov 2007
    Location
    Albury Well Just Outside
    Posts
    13,315

    Default

    I was at my mums the last week and I told her why I had the bandaid on the finger. Today being mothers day I was there again and as mothers sometimes do (at least mine) they fuss over their sons. She asked me if I went to the hospital?

    No Mum it is a nail, it will grow back.

  6. #5
    Join Date
    Apr 2010
    Location
    Melbourne
    Posts
    562

    Default

    Quote Originally Posted by Christos View Post
    I am a little embarrassed as to posting what I did but as this is a safety topic I guess I should post to prevent others from doing what I did.

    I was using a Block plane to take off a very fine shaving from a small piece of wood. I just had to take it out of the vice and check it as I went along. Then put it back in the vice and take a couple more shavings.

    I became a little lazy in doing that as I have about 15 pieces to do. So I just swapped to using the block plane in one hand and the piece of wood in the other. Not getting much of a shaving so I used a little more force and sliced a bit of the nail with some skin. Only took a very fine shaving but enough to start the blood flowing. One bandaid was not enough so two were needed and some dry antiseptic powder. Only cut about two or three mills.

    What have I learnt, is to avoid putting your hand near the sole of the block plane. Best to plane with your hands above the sole.
    I'm surprised it's taken you this long to gain that flattened look! I suspect most handplane weilders will confess to having done this.

    cheers,
    Gav.

  7. #6
    Join Date
    Mar 2007
    Location
    Munruben, Qld
    Age
    83
    Posts
    10,027

    Default

    Quote Originally Posted by Christos View Post
    I was at my mums the last week and I told her why I had the bandaid on the finger. Today being mothers day I was there again and as mothers sometimes do (at least mine) they fuss over their sons. She asked me if I went to the hospital?

    No Mum it is a nail, it will grow back.
    That's mums for you. Bless 'em
    Reality is no background music.
    Cheers John

Similar Threads

  1. Which block plane
    By gonty in forum HAND TOOLS - UNPOWERED
    Replies: 28
    Last Post: 30th January 2009, 10:27 PM
  2. A Compendium of Block Planes: The HNT Gordon Block Plane
    By derekcohen in forum HAND TOOLS - UNPOWERED
    Replies: 8
    Last Post: 16th August 2008, 09:54 PM
  3. Which LA block plane should I bid on?
    By woden in forum HAND TOOLS - UNPOWERED
    Replies: 12
    Last Post: 27th January 2007, 05:07 AM
  4. LN Skew Block Plane or LV Shoulder Plane
    By mat in forum HAND TOOLS - UNPOWERED
    Replies: 3
    Last Post: 25th October 2006, 06:46 PM
  5. block plane
    By aljenit in forum WOODWORK - GENERAL
    Replies: 8
    Last Post: 26th April 2005, 10:51 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •