Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
16th July 2022, 11:32 AM #1Senior Member
- Join Date
- Aug 2021
- Location
- Sydney
- Posts
- 241
Half mask respirator/dust mask dripping from breath condensation
I tried the RZ mask and didn't like it - just never felt like I could get a good fit.
So I switched to a 3M half-mask (or half-face?) dust mask (Access Denied)
I find it fits much better and has a tighter seal. So on that front I think it is a win!
The only downside that is pretty annoying is that after wearing it for a bit, visible condensation builds up inside the mask from my breathing, and this eventually drips out the front of the mask and onto stuff I'm working on. My guess is the silicon mask doesn't allow it to breath as much, hence the build up of condensation.
Is this a common problem? Short of stuffing something absorbent inside or taping it to the outside, any tips on how to avoid this?
-
16th July 2022 11:32 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
16th July 2022, 09:16 PM #2
I have experienced this with my 3M mask. The only solution I came up with was to stop breathing.....
-
16th July 2022, 09:44 PM #3.
- Join Date
- Feb 2006
- Location
- Perth
- Posts
- 27,839
get a decent dust extractor?
-
17th July 2022, 03:54 PM #4
We had a guy buy one of the elipse masks and he reported back that it was really good but as a heavy sweater it had a lot of build up from sweat.
His fix was to put a tissue in the bottom and problem fixed.Jim Carroll
One Good Turn Deserves Another. CWS, Vicmarc, Robert Sorby, Woodcut, Tormek, Woodfast
Are you a registered member? Why not? click here to register. It's free and only takes 37 seconds!
-
17th July 2022, 04:20 PM #5Senior Member
- Join Date
- Aug 2021
- Location
- Sydney
- Posts
- 241
Similar Threads
-
Dust Mask
By Red Gum in forum SCROLLERS FORUMReplies: 18Last Post: 1st March 2022, 08:10 PM -
Half face P2/P3 or equivalent mask / filters not made in China
By DunningKruger in forum SAFETYReplies: 14Last Post: 9th July 2020, 10:06 AM -
Half face mask for lower bridge nose
By qwertyu in forum SAFETYReplies: 4Last Post: 15th February 2018, 07:10 PM -
RZ Dust Mask
By brendan stemp in forum WOODTURNING - GENERALReplies: 16Last Post: 8th November 2017, 10:54 PM -
Condensation on face mask
By Rowan in forum WOODTURNING - GENERALReplies: 13Last Post: 24th May 2005, 09:19 AM