Page 2 of 2 FirstFirst 12
Results 16 to 23 of 23
  1. #16
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    52
    Posts
    1,989

    Default

    Quote Originally Posted by BobL View Post
    The problem with these muffs and a lot of others on Chainsaw operators helmets is they are only rated to 25 dB noise reduction. There are better muffs out there such as the peltor 10HB/A which are 30 dB. I recently bought Stihl Helmets are now available with these types of muffs.

    Hmm, not often you get to upstage Bob but after my research tonight (because I lost my Peltors) I can. The new 10HB/A muffs are 33dB their rating is 5+ rather than the old rating of just 5. So if you are buying a set make sure you get the new stock.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #17
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,757

    Default

    Quote Originally Posted by Burnsy View Post
    Hmm, not often you get to upstage Bob but after my research tonight (because I lost my Peltors) I can. The new 10HB/A muffs are 33dB their rating is 5+ rather than the old rating of just 5. So if you are buying a set make sure you get the new stock.
    The only "new" H10As I am aware of are the new High Visibility (HV Muffs) which are lime green as compared to black. Are these the ones you are referring to?

    The AS/NZS 1270:1999 H10A HV 290 standard rates the H10A HV at 33 db
    While ANSI S3.19-1974 H10A HV rates these at 30

    If you compare the H10A HV attenuation specs with the specs of the H10A I bought a couple of years back they are identical.

    This can be seen in the following graph


    The Symbols to compare are the red (H10A) and green (H10A HV). There are no green symbols showing because they are under the red ones ie they are the same

    The blue triangles are the H10B ("behind the head") type muffs. They are not quite as good but work better with a face shield than the A's.

    Also shown are the Peltor "Bulls Eye". These are marksman muffs and are superior at middle to higher frequencies to the H10A and H10B but not as good at the lower frequencies.

  4. #18
    Join Date
    Jul 2003
    Location
    Near Bodgy, AlexS, Wongo & CraigB
    Age
    18
    Posts
    2,666

    Default

    i recently also got a stihl chainsaw and lashed out on the heavy duty 30 db earmuffs. they work a treat, nice and firm on the head and the bunnies polycarbonate wrap around eye protection sit neatly on top of them. quite comfy.
    Zed

  5. #19
    Join Date
    Apr 2007
    Location
    Kalamunda, WA
    Age
    52
    Posts
    1,989

    Default

    Quote Originally Posted by BobL View Post
    The only "new" H10As I am aware of are the new High Visibility (HV Muffs) which are lime green as compared to black. Are these the ones you are referring to?

    The AS/NZS 1270:1999 H10A HV 290 standard rates the H10A HV at 33 db
    While ANSI S3.19-1974 H10A HV rates these at 30

    If you compare the H10A HV attenuation specs with the specs of the H10A I bought a couple of years back they are identical.
    Sorry, looks like I was conned by marketing ploys that list AS/NZS 1270:1999 H10A HV 290 standard rates and compare them to ANSI S3.19-1974 H10A HV rates to try and sell more. Maybe I will get some green ones to match my Lucas and make sure I don't get lost in dry jarrah dust to replace my new old black ones

  6. #20
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,757

    Default

    Quote Originally Posted by Burnsy View Post
    Sorry, looks like I was conned by marketing ploys that list AS/NZS 1270:1999 H10A HV 290 standard rates and compare them to ANSI S3.19-1974 H10A HV rates to try and sell more. Maybe I will get some green ones to match my Lucas and make sure I don't get lost in dry jarrah dust to replace my new old black ones
    Yeah I see various on-sellers have really picked up on the bigger number - bigger is always better, right

    As a source I recommend site sponsor Makka - his prices are pretty good even with shipping.

  7. #21
    Join Date
    Apr 2005
    Location
    Hillsdale 2036
    Age
    49
    Posts
    148

    Default

    When I was at uni studying for my Design tech teachers degree, I had to do a research assessment of hearing protection, and the highest DB reduction any ear protection can give you was about 36db.
    The reason the protection stops at that is because your bones carry the noise and vibration into your ears via the small bones inside your ear connected and surrounding the inner ear.
    So wearing ear plugs, and 3 pairs of ear muffs, would still only reduce noise to 36db.

  8. #22
    Join Date
    Aug 2016
    Location
    Brisbane
    Age
    57
    Posts
    1,311

    Default powered air respirator

    I had a chat to an expert that has worked for different safety equipment suppliers for years.
    He said the ultimate protection is a powered air respirator combined with ear protection of your choice.

    I have never tried one but I'm told they can be lithium battery powered, wrap around your chin for visibility and because they are pressurised they work even while wearing prescription glasses and of course never fog up. Apparently the air flow helps to keep your face 'cool'. I suspect by 'cool' they mean not hot.
    There is at least one model that replaces the head protection aspect with a washable fabric cap suitable for woodworkers and others that don't need head protection.

    Anyone tried one of these?

    Just curious really - because these things are outside my budget range.

  9. #23
    Join Date
    Feb 2006
    Location
    Perth
    Posts
    27,757

    Default

    Quote Originally Posted by DaveVman View Post
    I had a chat to an expert that has worked for different safety equipment suppliers for years.
    He said the ultimate protection is a powered air respirator combined with ear protection of your choice.

    I have never tried one but I'm told they can be lithium battery powered, wrap around your chin for visibility and because they are pressurised they work even while wearing prescription glasses and of course never fog up. Apparently the air flow helps to keep your face 'cool'. I suspect by 'cool' they mean not hot.
    There is at least one model that replaces the head protection aspect with a washable fabric cap suitable for woodworkers and others that don't need head protection.

    Anyone tried one of these?

    Just curious really - because these things are outside my budget range.
    Air powered respirators won't solve the wood dust on skin allergy problem.
    This is a much greater risk than cancer from wood dust.

    Once you have worked with respirators and then been able to do the exact same work without them you won't ever want to go back.
    Good dust extraction is a much better way to go that respirators.

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Hearing Impaired
    By Reno RSS Feed in forum GENERAL ODDS N SODS
    Replies: 0
    Last Post: 21st December 2008, 12:00 AM
  2. hearing protection recommendation
    By Carry Pine in forum WOODWORK - GENERAL
    Replies: 43
    Last Post: 7th January 2008, 10:38 AM
  3. Painful Moments
    By Allan at Wallan in forum WOODIES JOKES
    Replies: 2
    Last Post: 5th August 2007, 10:37 PM
  4. Anyone want a painful dentist?
    By ozwinner in forum NOTHING AT ALL TO DO WITH WOODWORK
    Replies: 5
    Last Post: 11th March 2007, 06:19 PM
  5. Painful Project
    By dai sensei in forum WOODWORK PICS
    Replies: 7
    Last Post: 18th July 2005, 09:44 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •