Thread: Is plywood safe for indoor use?

Why not just save on doubling up...buy a coffin....forever useful.

haha too luxurious!

Seems bunnings doesn't have any plywood on their website now though there was some a couple of days ago - Might as well go fishing

Interior plywood is used for furniture, sometimes laminated with a nice timber and for kitchen cabinets et al.
All my interior walls are plywood (timber house), so I believe you would be safe

Exterior grade ply would be even worse than interior ply. The fumes given off by exterior grade glues would be enough to send you rushing for a dose of fresh air. Then you say there are hinges and doors, doesnt sound like there is going to be much air flow. May be better to avoid man made products and stick with natural timber.
The coffin idea isn't a bad one. They only become expensive in highgrade design or fitted out. Have you thought about the second hand market?

Some exterior ply is also termite treated.

All types of interior or exterior ply made in Australia are glued with either an A, B, C or D gluebond - all are done using a formaldehyde glue and the difference is how well the glue stands up to heat and water. A is an exterior grade bond (phenol-formaldehyde), B is limited exposure (melamine fortified urea formaldehyde) and C and D are simply urea formaldehyde glues.

Plywood, X-Board Plus, Timber Veneer, MDF, Particleboard: Facts About Plywood

Personally I'd shy away from the very cheap imported products for a small enclosed box and use something from a more well known Australian supplier. You should even be able to pick up the horrible random grooved woodgrain ply wall panels fairly cheaply and nail them to a stud frame.

You can pick the phenol-formaldehyde glues by eye as they have a very dark brown/black glueline.

The glue line is only part of the problem. Veneers for ply manufacture are usually treated for borer attack.
These chemicals can be just as nasty as the glue. Imported ply may have undergone fumigation. just because a product is manufactured in Australia doesnt mean it is free of hazard. Much of what is pressed here has imported cheap veneers of unknown history.

Originally Posted by Master Splinter

You should even be able to pick up the horrible random grooved woodgrain ply wall panels fairly cheaply and nail them to a stud frame..

I was told they don't make them anymore.
When we bought the house all the walls were covered in that (shudder)

Thanks for all of the replies. It pretty much is sounding like ply is out and natural timbers are the way to go.

I am going to admit I really don't have much of an idea in what I am doing. If someone has a suggestion on a type of natural timber to use or the name of a recommended supplier I would be all ears. I am in Melbourne

Also I have been looking for the type of wood used inside saunas - the logic being that it's under stressful environmental conditions and various facilities arn't worried about getting sued for using it. Western Red Ceder seems to be what they use

At this point I am open to suggestions of how to do it though!

Western Red Cedar contains plicatic acid which is known to cause an allergic reaction in some people, so long term exposure might not be a good idea.

My general rule of thumb is that if you are looking for 'safe' timbers, you need to look at the least durable timbers (ie the ones that termites and borers and fungi and moulds love), as the most durable timbers don't have a 'most durable' rating because of some gentleman's handshake agreement with the bugs...nope, they are most durable as they have an efficient armoury of toxic chemicals that kill off bugs and fungi that try to make a meal from them.

Pine is generally a good starting point!

Do some research on Paulownia. Having read the earlier suggestions including use for a sauna I believe it ticks all the boxes. I used to grow and sell it so maybe a bit biased. However it is a light weight and coloured timber that is easy to work with. It is lighter than WRC but just a strong. The employees at the big sawmill don't wear any protective apparatus when milling and processing the timber. Nor did I. Port Phillip Plantation Shutters sells it in Melbourne.

Whitewood

Originally Posted by casualmondaus

I am going to admit I really don't have much of an idea in what I am doing. If someone has a suggestion on a type of natural timber to use or the name of a recommended supplier I would be all ears. I am in Melbourne

At this point I am open to suggestions of how to do it though!

if you're looking to avoid the POS syndrome, perhaps a simple frame draped with a sheet or blanket is the go

Thanks, I'll have a look into Paulownia. Could be a possibility

Originally Posted by ian

if you're looking to avoid the POS syndrome, perhaps a simple frame draped with a sheet or blanket is the go

I should have mentioned it in an earlier post but it needs to keep a reasonable amount of the noise from inside the box from escaping the room - I realise this is all sounding a bit weird. I'm not fussed if it looks like a POS It's going to be about 19sqm (excluding the floor area) so a frame draped in blankets that would muffle noise would still add up in price going down that road

After reading some about Perspex safety I'm wondering if that might be the go.. though it's getting away from being wood work related

Originally Posted by casualmondaus

I should have mentioned it in an earlier post but it needs to keep a reasonable amount of the noise from inside the box from escaping the room - I realise this is all sounding a bit weird.

yes it is
why can't you wear head phones or just shut the door?

I'm not fussed if it looks like a POS

I meant POS = parent over shoulder


this is sounding more and more like a HSC assignment