Page 2 of 2 FirstFirst 12
Results 16 to 19 of 19
  1. #16
    Join Date
    Apr 2005
    Location
    Warragul
    Age
    68
    Posts
    577

    Default

    Quote Originally Posted by FenceFurniture View Post


    3M 7502 mask minimum cost in first year $105.45 (but an additional 8 pairs P2 pads has $80 tied up)
    and that gives me protection level A1P2. Ongoing costs of $42 per year minimum.
    FF an update/alternative on your research and thanks for a great post. I was after the 3M 7502 as well with the same cartridges you mentioned. PaintAccess has a special with the 7502 plus the 501 cover and filters and cartridges for $55 delivered to Victoria. The cartridges and filters are not the 5925 and 6051 but you can buy a pack of them at Bunnings for $24 which includes a pair of 6051 and two pairs of 5925, which is a year's worth. No need to tie up your money buying 10 pairs.

    So in my case that's $79 in the first year and $24 per year after that. I find that quite reasonable for good A1P2 protection.

    When I read your figures I was concerned how much this was going to cost me, particularly in the first year, but It was that pack at Bunnings that eased my mind. I hope this helps someone

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #17
    crowie's Avatar
    crowie is online now Life's Good, Enjoy each new day & try to encourage
    Join Date
    Dec 2009
    Location
    Faulconbridge, Lower Blue Mountains
    Age
    68
    Posts
    11,165

    Default

    Just a side issue Brett,
    If a person, such as myself has "no sense of smell" after a badly broken face and the "rule of thumb" is smelling what you're wanting to filter;

    HOW do you start to smell what you're wanting to filter when you can't?

    Add to this COPD [COPD is a long-term disease of the lungs which causes shortness of breath. COPD is an umbrella term for conditions including emphysema, chronic bronchitis and chronic asthma which is irreversible. While there is no cure for COPD, there are things you can do to breathe easier and improve your quality of life particularly if it is identified and managed early.] as a result of the chemicals we used in the RAN in the 1970's without any idea of the usage precautions or long term health effects.

    Cheers, crowie

  4. #18
    FenceFurniture's Avatar
    FenceFurniture is offline The prize lies beneath - hidden in full view
    Join Date
    Oct 2010
    Location
    1017m up in Katoomba, NSW
    Posts
    10,651

    Default

    Not sure Peter. I think the only thing you would be able to do is replace the "A" part of the filter at least every 6 months. Or use the masks that I use and replace them every 6 months. It really depends on how much stuff you are using that will fill up the "A" part of the filter. The "P" part of the filter is pretty easy - if you can't breathe in properly through it then it needs replacing.
    Regards, FenceFurniture

    COLT DRILLS GROUP BUY
    Jan-Feb 2019 Click to send me an email

  5. #19
    Join Date
    Sep 2010
    Location
    Port Sorell, Tasmania
    Posts
    592

    Default

    Following on from an earlier post in this thread I tried some cheap perfume on my organic vapour filter and it not a trace was detectable. Some 2 months later when I went to use the mask there was a very noticeable smell of perfume when breathing through the filter. This reinforces the manufactures comments that volatile fumes can migrate through filters when they are not in use and such filters have a short shelf life once they have been used. Even after light use. If you are using your mask on hazardous volatiles it would pay to read the directions from your own vapour cartridge manufacturer. For us low frequency users it would appear that smaller cartridges changed more frequently would be better than large ones that have higher capacity.


    Tony
    You can't use up creativity. The more you use, the more you have. ~Oscar Wilde

Page 2 of 2 FirstFirst 12

Similar Threads

  1. Powered half-face masks...is there a mid-tier?
    By elanjacobs in forum SAFETY
    Replies: 7
    Last Post: 3rd November 2017, 07:14 AM
  2. Replies: 5
    Last Post: 14th October 2017, 09:32 PM
  3. 3M Half Face Respirator Recommended!
    By pellcorp in forum WOODWORK - GENERAL
    Replies: 15
    Last Post: 8th October 2010, 11:11 AM
  4. Powered face respirators
    By Lyle in forum SAFETY
    Replies: 25
    Last Post: 8th January 2010, 03:12 PM
  5. Face mask respirators
    By andrewsd in forum WOODTURNING - GENERAL
    Replies: 0
    Last Post: 1st March 2007, 05:01 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •