Thanks Thanks:  0
Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Page 1 of 2 12 LastLast
Results 1 to 15 of 18
  1. #1
    Join Date
    Jul 2005
    Location
    Toowoomba Qld.
    Age
    65
    Posts
    2,792

    Default Chainsaw excitement

    Evening all,
    Just thought I'd relate something that happened to me this afternoon. I was in the firewood cutting mode, and had brought out my petrol chainsaw, a little 026 Stihl. Unfortunatley I' just found a stack of salvaged slab timber from a cattle yard was infested with termites, but no surprised.
    So I was into and firewood it became:mad:, when I noticed the chain seem to be looking a bit slack. Didn't worry me too much, because it wasn't long ago I'd adjusted it, and was on the last piece. Next thing I know the bl88dy side cover fell off onto the wood, and as the thought "Doesn't that bit hold the chainbar on?!" flashed through my mind, the chainbar pitched forward and the chain slowly unravelled!!:eek:. I was amazed (and relieved) at the slowness that it all happened...I always expected the chain would whip around and get all tangled in the cut. I switched off quickly, and pulled the engine and handle, all that was left, away from the job, and what I really noticed was how long it took for the motor to come to a stop.
    No damage to chain or bar that I could see. I found one of the side cover nuts in the dirt and sawdust, but have lost the other. I think there is a message in there somewhere, about not being complacent about pre-start checks.

    Cheers,
    Andy Mac
    Change is inevitable, growth is optional.

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Age
    2010
    Posts
    Many





     
  3. #2
    Join Date
    Oct 2001
    Location
    Warwick, QLD
    Age
    45
    Posts
    3,462

    Default

    Andy, You one really lucky man!!!
    Have a nice day - Cheers

  4. #3
    Join Date
    Nov 2003
    Location
    Australia and France
    Posts
    8,175

    Default

    I wish I wasn't scared of chainsaws, but I am. :eek: :eek: :eek:

    Glad it worked out THIS TIME.

    P

  5. #4
    Join Date
    Feb 2003
    Location
    Garvoc VIC AUSTRALIA
    Posts
    11,464

    Default

    A relatively safe mishap though.
    Because of the way chainsaws are made you stand left of the the cover.
    The chain can only come off to the right.
    Unless it snaps, thats why you should never stand inline with the bar.

    But it is a character building event.
    Regards, Bob Thomas

    www.wombatsawmill.com

  6. #5
    Join Date
    Dec 2004
    Location
    Toowoomba Q 4350
    Posts
    9,217

    Default

    Geez Andy! Glad you are ok.

    I'm with Midge, I prefer to stay away from chainsaws too.

    cheers
    Wendy

  7. #6
    Join Date
    May 2003
    Location
    Kuranda, paradise, North Qld
    Age
    62
    Posts
    5,639

    Default

    Andy,
    are you sure that it happened really slowly? Just my experience on a couple of occasions when things have gone wrong (falling through a very high shed roof, being hit by a drunkdriver causing my car to flip 3 times) the adrenalin seems to kick in really quickly and things that probably only took seconds (or fractions thereof) seem to take forever. I can still recall every fine detail of those two events and they happened over twenty years ago. Glad to hear you're safe (note to self, check bolts on bar next time I use saw )

    Mick
    "If you need a machine today and don't buy it,

    tomorrow you will have paid for it and not have it."

    - Henry Ford 1938

  8. #7
    Join Date
    Jan 2005
    Location
    Melbourne
    Age
    65
    Posts
    11,997

    Default

    My dad worked in the forestry industry for a while, some of the stories his mates told were frightening: sliced legs, lost nadgers, severed arteries...

    Your a lucky guy Andy, glad to see you safe - buy a Tatts ticket.

  9. #8
    Join Date
    Aug 2005
    Location
    Bundanoon, Southern Highlands
    Posts
    1,059

    Default Chain saws - yuk!!!!

    Chain saws- I gave my big Stihl and as a matter of need brought a cheap electric powered monster, like routers too noisey and dangerous for me!
    Tony Ward
    Now a power carver and living the dream.

  10. #9
    Join Date
    Mar 2001
    Location
    forest. tasmainia
    Age
    91
    Posts
    1,586

    Default

    Only one saw for me.
    BANDSAW !
    p.t.c

  11. #10
    Join Date
    Jun 2005
    Location
    Sydney
    Posts
    3,096

    Default

    Yep... scary bloody things, particularly when you don't get any decent training on them.

    Motor + horsepower + sharp spinny thing + no training = me not using it.
    Cheers,
    Clinton

    "Use your third eye" - Watson

    http://www.flickr.com/photos/clinton_findlay/

  12. #11
    Join Date
    Aug 2005
    Location
    South Australia
    Age
    77
    Posts
    279

    Default

    Agree with a previous poster. A tacket in tits is what yer need! If you win, I'll go you halves in the price of the ticket. Honest!

  13. #12
    Join Date
    Feb 2005
    Location
    East Bentleigh, Melbourne, Vic
    Age
    68
    Posts
    4,494

    Default

    I was getting nervous as I read through your post mate!

    Things always slow down (or appear to) when the the whole cow shed is about to hit the wind farm :eek:

    Glad that you're ok

  14. #13
    Join Date
    Jun 2000
    Location
    Western Australia
    Age
    77
    Posts
    3,679

    Default

    Glad to hear that you're OK Andy,recall a story some years back out of a readers digest magazine about a fella in the forest somewhere in Canada who had his jugular sliced.

    Apparently the saw bucked and came up and across and sliced partly thru his jugular.
    Blokes still alive,drove his F100 pickup one handed with the other hand holding pressure on the wound. He was on the point of passing out when he got into the Hospital and collapsed in the hospital entrance....one lucky fella who lived to tell of the foibles of taking any machinery for granted!!

    Heck when you think of all the gear we work with these days whether inside or outside the shed... Andy has raised some salient points on our need towards our own well being.

    Take Care.
    Cheers
    Johnno

    Everyone has a photographic memory, some just don't have film.

  15. #14
    Join Date
    Nov 2004
    Location
    Millmerran,QLD
    Age
    73
    Posts
    11,152

    Default

    The metal tag under modern chainsaws is there for a good reason. Good to hear you can still tell the story. Always a good indicator of a sign of life.

    Remember, always keep the left arm straight. Don't use the saw above shoulder level.

    Regards

    Paul
    Bushmiller;

    "Power tends to corrupt. Absolute power corrupts, absolutely!"

  16. #15
    Join Date
    Jul 2006
    Location
    Canberra
    Age
    54
    Posts
    914

    Default

    My old man worked in the forrestry for about 40 years, a man who could use a chainsaw! I grew up in the bush for a week at a time splitting posts and gathering rails. I learnt to respect the inherant dangers of a saw well before I was allowed to wield one.

    The first saw I used, at the age of 13, was a Stihl 090. OMG what kind of sicko was my dad? Anyway he always said respect the saw and it will serve you well.

    I dont own a saw now, but I have a pretty good arsenal on hand if need be. My father now does a lot of 'bush' carpentry. Chairs, stools and other furniture as well as carving animals with a modified stihl.

    Ok I have rambled on long enough. Chainsaws MUST be treated with respect and used by those with adequate skills. If it is not it usually has the last word.....

    Pete

Page 1 of 2 12 LastLast

Similar Threads

  1. Chainsaw mills
    By Auzzie turner in forum HAND TOOLS - POWERED
    Replies: 17
    Last Post: 5th August 2006, 12:35 AM
  2. Chainsaw jigs and sharpening
    By Tiger in forum WOODTURNING - GENERAL
    Replies: 27
    Last Post: 27th June 2006, 10:30 PM
  3. chainsaw mill & a good big chainsaw
    By Cliff Rogers in forum HAND TOOLS - POWERED
    Replies: 33
    Last Post: 18th April 2006, 08:51 AM
  4. Chainsaw mills.
    By outback in forum WOODWORK - GENERAL
    Replies: 12
    Last Post: 9th May 2005, 07:56 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •