Thread: Casting help

Try PMing NewLondon88, Charlie makes Resin Saver Moulds, Amos

Here is an excellent article on casting.
http://content.penturners.org/articl...dpolyresin.pdf

Here is one on making molds. In fact it was written by one of your country men.
http://content.penturners.org/articl...icone_Mold.pdf

You can find other casting articles at the IAP: IAP Home

Sorry, can't help you with where to get stuff in your part of the world.
Do a good turn daily!
Don

Originally Posted by Fredo

I'd like to have a go at resin casting and I have a few questions -

1. Resin saver moulds - how, where, what types are available and cost (can't find a website)
2. Where to buy resin and colouring

I've done some research, You Tube and web surfing. I have some idea about the casting process but as yet have not actually cast any. All help and advice especially on what works and where to purchase it would be very much appreciated.

Fredo

I use barnes for my resin and also if you choose to make some molds they have good silicone to do that job.

Barnes Products Pty Ltd - Resins - Polyester



Cheers Ian

Also have a good look through the castings section in the pen forum you can find a heap of stuff in there.


Cheers Ian

Amos - Thanks for the info, I contacted Charlie and have moulds coming soon.

Don - Some very useful information in those links. Thanks for the help.

Dorno - Thanks for the link to Barnes, it will be very handy. I'm busy reading everything on the forum in an effort to catch up with you guys.

I'm not addicted to pens...honest.

Fredo