Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: Custom Wedding Set
-
4th June 2013, 07:00 PM #1
Custom Wedding Set
Hey All
Here is my latest customer order a wedding set ;-) Jr Gents casted in Carbon Black and Pearl White & Reflux Violet and Pearl White home casted wet sanded to 1200g and finished with NP. While I was turning these with out bushes I discovered that the finish size of the body of the Jr is not one size all the way even thoe in the instructions it's says 12.3 mm when I turned down the purple one and assemble I noticed the the end of the body was not a perfect fit :mad:. It is not that noticeable but I am a little as I am trying to refine my techniques. So I check the fittings on the bottom part of the Jr and it was not 12.3mm it is in fact 11.81mm so I did the next one and turned it to suit the fittings instead and perfection ;-) anyway I check the rest of my Jr's and they are akk the same 12.3mm at the top and 11.81mm at the bottom
All comments welcome
Thanks
Ian
-
4th June 2013 07:00 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
4th June 2013, 07:05 PM #2
Nce work Ian
Yes this issue has come up before and I am surprised that David hasn't corrected the Jr Gent instructions by now.
When working without bushes it is always a good idea to work to the measured fittings rather than written instructions.
-
4th June 2013, 07:13 PM #3
-
4th June 2013, 07:17 PM #4
From memory there are a couple of other kits that have slight variations on their sizes in the instructions as well, but off hand I can't remember which ones.
Timberbits is not alone in this, nearly all the kit suppliers suffer the same inaccuracies. Whenever I need to make No Mandrel Bushes for a kit I haven't made before (and don't have in stock) I always ask the customer to send me a kit as I refuse to make these bushes to the published sizes.
Anyway, 0.5mm difference is very obvious to the feel!
-
4th June 2013, 08:20 PM #5
Excellent work on that set Ian, nice job on the casts. I never trust the instructions when it comes to sizes anymore and always use callipers to get the final size.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
4th June 2013, 08:38 PM #6
Re: Custom Wedding Set
Hey mate thanks for the info on the issue but I am not having a go at Timberbits at all mate just frustrated thats all. I have never had any issues with Timberbits and buy 90% of my gear from there and will continue to do so ;-)
Hey Trev
Thanks mate sent pics to her today and she is over the moon ;-) and I will use the fittings for finish sizes from now on lol
Ian
Similar Threads
-
Wedding Pen
By Dorno in forum WOODTURNING - PEN TURNINGReplies: 8Last Post: 17th September 2012, 03:10 PM -
Wedding Pen Set
By PenTurner in forum WOODTURNING - PEN TURNINGReplies: 25Last Post: 27th August 2012, 06:46 PM -
Wedding pens and custom box
By ppofandt in forum WOODTURNING - PEN TURNINGReplies: 9Last Post: 16th October 2011, 07:30 AM -
Custom box and wedding pens
By Simomatra in forum WOODTURNING - PEN TURNINGReplies: 10Last Post: 5th August 2011, 08:50 AM -
Wedding Pen
By stevo81 in forum WOODTURNING - PEN TURNINGReplies: 7Last Post: 18th December 2010, 08:00 PM