Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Just another day in Resinville
-
1st March 2009, 07:55 AM #1SENIOR MEMBER
- Join Date
- Sep 2008
- Location
- Maryvale, Queensland
- Posts
- 2,338
Just another day in Resinville
Hi Folks,
Just trying out some new resins here, pen isn't supposed to necessarily look good.
The left side is to see if I can reproduce the "Lava Flow" blank I posted a while ago. Did this one slightly redder than the last which was Orange, but more importantly with the right side, was made with pure Aluminium flakes.
Apart from the obvious problem with the darn tube showing again, which I believe is due to the nature of the flakes, what do you think of the result? I was hoping to try and get a pure metal look. Well that obviously didn't happen. I've got a couple of other versions of the same blank with slight variations in each, which I'm not sure I'll bother making into pens, as I'm not that happy with the result.
Russell.Pen Affair Craft Supplies - Cheapest Pearl Ex & Pemo Polymer Clay in Australia
http://craftsupplies.penaffair.com
-
1st March 2009 07:55 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
1st March 2009, 09:18 AM #2
-
1st March 2009, 09:22 AM #3
I agree looks a bit like granite
Looks ok to me might be one where you've gotta paint the tuberegards
Nick
veni, vidi, tornavi
Without wood it's just ...
-
1st March 2009, 10:08 AM #4
I agree on the granite look. Looks cool!
-
1st March 2009, 10:47 AM #5
Russell,
not sure if it's the photo, but it looks like at the clip end, where the tube shows, is a bit overturned. If that is the case, maybe it wouldn't show if it wasn't. Still looks good.
-
1st March 2009, 11:48 AM #6Skwair2rownd
- Join Date
- Nov 2007
- Location
- Dundowran Beach
- Age
- 76
- Posts
- 19,922
I like it! Lava flow is great look, top is fine although tube painting would help.
-
1st March 2009, 11:54 AM #7
i agree it looks like granite at the clip end but that to me makes it look like it belongs with lava flow it's got a whole volcano eruption thing going.
-
1st March 2009, 12:20 PM #8Senior Member
- Join Date
- Dec 2008
- Location
- Narromine,NSW
- Age
- 50
- Posts
- 313
I like it Russell
It looks great.
-
1st March 2009, 12:29 PM #9SENIOR MEMBER
- Join Date
- Sep 2008
- Location
- Maryvale, Queensland
- Posts
- 2,338
Yup, it's the picture. because the resin is clear there, you can really only see the tube, not the clear bit above it, although it is very close to the bone, so to speak. Painting will help. I did put heaps of the flakes in, so I'm not game to add any more to try and make it more opaque, as I think the resin integrity may begin to suffer.
So this is a case were tube painting is essential it seems, or else tinting the resin a bit. I do have a piece that has blue PTFE dye in and red glitter as well, but it can sit for a while till I contemplate my belly button a bit longer.
Russell.Pen Affair Craft Supplies - Cheapest Pearl Ex & Pemo Polymer Clay in Australia
http://craftsupplies.penaffair.com