Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Diablo's
-
24th March 2015, 09:45 AM #1Turned a Few
- Join Date
- Jul 2008
- Location
- Red Deer, Alberta Canada
- Age
- 77
- Posts
- 1,958
Diablo's
Diablo Black Titanium/Chrome with Drake and Hen Mallards in Flight on Curly Maple.
Diablo Gold/Chrome with Drake Mallard in Flight on Curly Maple.
Les
-
24th March 2015 09:45 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
24th March 2015, 10:26 AM #2
Nice work Les
Am I correct in assume they are transfers?Neil____________________________________________Every day presents an opportunity to learn something new
-
24th March 2015, 03:04 PM #3Turned a Few
- Join Date
- Jul 2008
- Location
- Red Deer, Alberta Canada
- Age
- 77
- Posts
- 1,958
-
24th March 2015, 11:36 PM #4
Masterly done as always Les
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
25th March 2015, 07:24 AM #5Intermediate Member
- Join Date
- Jan 2015
- Location
- New Zealand
- Posts
- 48
They look very special.Where would be the best place to get transfers for use in Pen Making. Is there anything special about them.I assume one could use the same technique as is used for printing on to wood - using the backing from Avery label sheets and then seal them with CA or similar
-
25th March 2015, 11:56 AM #6
Do a search on labels and there are lots of threads on it. Here's one for example https://www.woodworkforums.com/showth...ghlight=labels
Neil____________________________________________Every day presents an opportunity to learn something new
-
26th March 2015, 01:37 AM #7Turned a Few
- Join Date
- Jul 2008
- Location
- Red Deer, Alberta Canada
- Age
- 77
- Posts
- 1,958
I use Testors Clear Waterslide decal paper and my inkjet printer.
Testors decal paper in very thin making it very easy to hide the edges.
Found that Avery sticker paper too thick and then you have to use multiple coats of CA or having to cast in PR to hide the edges.
Les