![Thanks](https://www.woodworkforums.com/dbtech/thanks/images/thanks.png)
![Likes](https://www.woodworkforums.com/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 7 of 7
Thread: drill bits
-
23rd January 2007, 06:28 PM #1
drill bits
I mainly use brad point type drill bits for drilling pen blanks.But I do not have one for the Sierra pen kit,and I am using 27/64 Sutton bit(which they claim,has a special point to stop wandering).
Before I go to the expense of purchasing a 11 MM brad point drill do you people think that it will be suitable or would the hole be to large.
My calculation makes the 11 MM just .284 mm larger than the 27/64.Would epoxy take up that much slack.
What type of drills do other pen makers use ?
Regards Terry
-
23rd January 2007 06:28 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
23rd January 2007, 06:41 PM #2
G'day Terry
I just use a normal drill bit at that size(27/64) and haven't had any probs with it wandering. Can't imagine a bit that size wandering to have to replace it with a 11mm brad bit.Cheers
DJ
ADMIN
-
23rd January 2007, 08:07 PM #3
I to just use a Suttons viper bit 27/64 I have made heaps of Sierras and never had a problem however i do make my blanks 21mm just to give a little protection from major blowout, fortunately with them being a single tube a little wander has never bothered any of mine as long as you mill your ends dead square to the tube.
and I always use epoxy anyway.
Froggie
-
23rd January 2007, 09:34 PM #4
Thirded.
- Andy Mc
-
24th January 2007, 08:47 AM #5
Sierra Pens
Wandering around Arizona Silhouette sit the other day,found their instructions to make Sierras www.arizonasilhouette.com/sierrapen.pdf
they give the drill size and full instructions.
They sell Norseman Drills and DeWalt Pilot Point and give engineering specs for them.
Also on their site they exclude some drills and do not stock them any more one is the brad point drill.
My info is this firm is multi million in pens per year however everyone has their own theory with regards to brands shapes and sizes,this info is given to assist you in your choices,they confirm the drill sizes given in answer to your query.Hope this helps you. Peter
-
24th January 2007, 12:07 PM #6
I've sort of gone off brad points. they only seeem to have advantages in softer timbers.
In the real hard stuff and the plastics I don't think the go so well.
A full set of metric, imperial and wire guage drills is a real assett and not too expensive.
cheersAny thing with sharp teeth eats meat.
Most powertools have sharp teeth.
People are made of meat.
Abrasives can be just as dangerous as a blade.....and 10 times more painfull.
-
25th January 2007, 11:13 AM #7
Last edited by Terry B; 25th January 2007 at 11:13 AM. Reason: typo
Terry B
Armidale
The most ineffective workers will be systematically moved to the place where they can do the least damage - management.
--The Dilbert Principle
Similar Threads
-
Rescueing old drill bits
By Shedhand in forum HAND TOOLS - UNPOWEREDReplies: 17Last Post: 18th January 2007, 11:05 PM -
Impact Drill - Damaging drill bits
By BassTeQ in forum HAND TOOLS - POWEREDReplies: 18Last Post: 9th September 2005, 10:16 PM -
selling up tool sale
By tasy_ted in forum METALWORK FORUMReplies: 1Last Post: 17th July 2005, 08:49 PM -
storing drill bits
By Redback in forum WOODWORK - GENERALReplies: 8Last Post: 9th March 2005, 11:02 AM