Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 6 of 6
Thread: filling gaps
-
10th October 2013, 08:43 PM #1SENIOR MEMBER
- Join Date
- Oct 2008
- Location
- Syndey
- Age
- 38
- Posts
- 788
filling gaps
Hi everybody
When you make a huge mistake turning a pen with a skew and get a dig in and remove a chunk of mamaterial down to the tube (like I did the other day), what do you use to fill the void? I'm not ready to throw away this one.
I know of glitter or coffee grounds in resin or CA. What other tricks do you use?
Many thanks, Simon.
-
10th October 2013 08:43 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
10th October 2013, 08:51 PM #2
Simon I have used brass & Alli filings as well. Epoxy mixed with anything I can find or come up with which will look good.
-
10th October 2013, 10:52 PM #3
Adding "features " to a pen with a skew can be a bit tricky ,and have surprising results at times , sometimes you can find enough of the missing bits to make a patchup viable, depending if its wood or acrylic though acrylics are pretty easy to patch , with wood you need to try and make a patch look like it belongs ,eg a darkish burl ,I would use some coffee grounds or some of the dust or shavings from the job at hand, or even a bit of ebony shavings ,this when finished can look like a knot or such , as you go on try and collect some different shavings in small containers for times you may need it , You can also do a bit of shaping with a dremel to accentuate the shape, and do a repair pour of colored epoxy ,make a well around the repair site with plasticine so you can get a slight buildup when you pour in the epoxy ,you may need to paint the brass tube with a (textra black ) if it might show through , I often just add some of the fill material and pour thin CA onto it ,build it up in layers though not all at once as you may not get penetration down to the tube . In this business its the problem ones that keep it interesting cheers ~ John
G'day all !Enjoy your stay !!!
-
10th October 2013, 11:26 PM #4No Result Without Effort
Mecha Blanks now on Facebook - Miks Blanks
Mecha Blanks now Available at Perfect Pens and Pencils
Find me on Facebook - Pens by MIK
-
11th October 2013, 09:10 AM #5
Anything that can be added to a bit of epoxy and give a contrast will suffice, I've even used a bit of pearlex in the epoxy and like John said a bit of plasticine or blue tack to make a well. Thinking outside the square sometimes gives amazing results and the beauty is if it don't look right take it out and start again.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
12th October 2013, 08:21 AM #6
Similar Threads
-
Filling Gaps
By sturina in forum WOODTURNING - GENERALReplies: 4Last Post: 9th June 2012, 05:54 PM -
Filling gaps in Bamboo Board
By KnockDesign in forum FINISHINGReplies: 0Last Post: 30th October 2011, 05:20 PM -
Filling gaps
By maggie bish in forum FINISHINGReplies: 2Last Post: 16th January 2010, 09:22 AM -
Filling Gaps in parquet floor - what to use?
By steverog in forum GLUEReplies: 2Last Post: 7th May 2009, 11:44 PM -
Filling gaps in joints
By angad in forum FINISHINGReplies: 14Last Post: 20th December 2006, 04:35 PM