Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
Thread: Finish for M3 type blanks?
-
3rd March 2014, 11:11 PM #1
Finish for M3 type blanks?
About 4 years ago I made some M3 metal pens, but I am not satisfied with the finish, I intend to dismantle and refinish them, can anyone guide me as to what finish to use, would CA be ok???????, Thanks
here is a picture of the pen.
M3 Mokume FP1 (Large).jpgGood, better, best, never let it rest;
Til your good is better, and your
better, best.
-
3rd March 2014 11:11 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
4th March 2014, 07:43 AM #2
Amos. to the best of my knowledge M3 is just resin and various metal powders plus some pigment(s).
They should polish up to a reasonable gloss, but failing that I don't see why you can't finish them with your usual CA routine.
-
4th March 2014, 08:30 AM #3
Hi Amos
I have heard that others use CA on top of the M3 blanks but I wouldn't.
M3 blanks just needs to be buffed up with MM or M3-PMP. Once it has been buffed the finish is amazing on them.
Regards
DavidDirect Importer of pen kits. Lowest prices and largest range.
Pen kits and pen blanks - www.timberbits.com
-
4th March 2014, 06:29 PM #4
OK, thanks for the info Fred and David, I will try to buff and see what happens. Amos
Good, better, best, never let it rest;
Til your good is better, and your
better, best.
-
6th March 2014, 10:50 PM #5
Tried buffing, not satisfactory, must needs disassemble complete pen and see if refinishing on the lathe will do it, I did use the proper stuff provided originally, but something is incorrect in the way it was done. , hard part is disassembling. Amos
Good, better, best, never let it rest;
Til your good is better, and your
better, best.
Similar Threads
-
What type of Finish is this?
By hano in forum FINISHINGReplies: 1Last Post: 4th March 2010, 03:33 PM -
What type of finish is this?
By salopian in forum FINISHINGReplies: 2Last Post: 22nd February 2009, 03:53 AM -
What type of finish is this?
By Archit48 in forum FINISHINGReplies: 0Last Post: 18th January 2007, 09:41 PM -
A different type of finish
By Babytoolman in forum FINISHINGReplies: 5Last Post: 10th August 2004, 10:43 PM -
what type of finish to use?
By abcini in forum FINISHINGReplies: 4Last Post: 2nd June 2004, 11:08 PM