![Thanks](https://www.woodworkforums.com/dbtech/thanks/images/thanks.png)
![Likes](https://www.woodworkforums.com/dbtech/thanks/images/likes.png)
![Needs Pictures](https://www.woodworkforums.com/images/smilies/happy/photo4.gif)
![Picture(s) thanks](https://www.ubeaut.biz/wave.gif)
Results 1 to 12 of 12
Thread: Flocking the pen box
-
8th October 2008, 09:48 PM #1
Flocking the pen box
As promised to someone?!
, Here is how to flock the inside of a box, the boxes here are both large , but apply the principle to your usual boxes.
1. and 2. show box as it was.
3. the products needed, flocking glue and powder and paint brush.
4. the painted box,
5.the powder poured inside, closed and shaken
6. the result
7,8, and 9 with another colour and different box, both took about 30 minutes total, wash out brush with water, allow 24 hrs to dry, shake excess onto a tray and save for another time.
AmosGood, better, best, never let it rest;
Til your good is better, and your
better, best.
-
8th October 2008 09:48 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
8th October 2008, 10:03 PM #2
Thanks for the photo's Amos. Had thought about doing it a few times but never got around to it. Might be just what I need for another project I am working on at the moment (bit of a way off the flocking stage at the moment though)
It's only a mistake if you don't learn from it.
-
8th October 2008, 10:05 PM #3
Thank you, Amos!
When all is said and done, there is usually a whole lot more said than done.
-
8th October 2008, 10:21 PM #4
Thanks for the info.
It looks great in the photos but are you happy with the results?
Do little bits fall off after the flocking has dried? If you hit it was compressed air about 2 or 3 days after application, do you loose some flock?
I might have to give it a go next. It looks great.
Timberbits
-
8th October 2008, 10:55 PM #5
more on flocking
If this helps Corbs, Cisco and Timberbits, then I would be very happy. The questions re do bits fall off? after it is dried tapping off the excess usually does the trick, very light compressed air may get some excess off, usually fairly good sometimes putting some objects inside and let them work off some "excess" helps, it is suggested to use a brush to wipe out excess in corners. The photo shows one I did a while back and I put my rejects in there untill i get time to put them on the lathe and salvage the tubes. Amos
Last edited by PenTurner; 8th October 2008 at 10:57 PM. Reason: photo did not go on.
Good, better, best, never let it rest;
Til your good is better, and your
better, best.
-
8th October 2008, 11:17 PM #6
You've got to risk it to get the biscuit
- Join Date
- Jan 2006
- Location
- Canberra
- Age
- 32
- Posts
- 4,195
theres some nice timbers in that reject box
S T I R L O
-
8th October 2008, 11:43 PM #7
Is that snakewood in the box?
-
9th October 2008, 04:51 AM #8
Those rejects look better than my keepers! That snakewood would have made a fine pen if it hadn't cracked.
When all is said and done, there is usually a whole lot more said than done.
-
9th October 2008, 07:29 AM #9
Cool post thanks, Amos.
Toasty
"The knack of flying is in learning how to throw yourself at the ground and miss."
-
9th October 2008, 07:38 AM #10
Hi Amos,
The little bit of flocking that I have seen was not very soft ( from memory ). Amos do you think that the flocking would harm or scratch the finish on a pen.
Terry
-
9th October 2008, 09:30 AM #11
Well done Amos, a great set of photographs.
Beaut box I like the inlays on the box top. Did you cut that with the laser?
-
9th October 2008, 12:59 PM #12
Sam, not inlays, forgot how the man made them, purchased them at the Irish festival in Kilmore this year. Are they soft, not really, but if you look at the red box in the first set of photos, there was red felt pad at the bottom already, I just painted the botttom also with the sides and stuck aok and is soft because of the felt underlay. As for hurting the pens, no it doesn't hurt the pens or scratch them. When the flocking is new, some of the Synthetic materials do act as a magnet for loose flocking, but I just brush that off, bit like hair attracted to a comb.-static electricity.
Alas, that snakewood would have been beautiful, but has hairline cracks, some of the rejects are overturned, or have a small crack etc. etc. I should call it the box of hard knocks! AmosGood, better, best, never let it rest;
Til your good is better, and your
better, best.
Similar Threads
-
Flocking Spray Gun
By t.clark in forum FINISHINGReplies: 0Last Post: 22nd June 2007, 07:53 AM -
Flocking
By Roly in forum FINISHINGReplies: 6Last Post: 13th September 2003, 10:04 PM -
flocking powder
By cameron nicholl in forum FINISHINGReplies: 9Last Post: 21st July 2002, 10:49 AM