Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
Thread: Help with finish
-
6th February 2009, 10:56 PM #1
Help with finish
I have a cast with wood and resin, now after I turn it down to size how would I finish it. With resin I wet sand and with the wood I dry sand.
Now to finish of the wood I use WOP and with resin I use brasso.
How can I mix it up to give the best finish I can.
David
-
6th February 2009 10:56 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
6th February 2009, 11:28 PM #2
CA finish
-
6th February 2009, 11:41 PM #3
Dry sand until you're happy with the finish on the resin, taking care not to "hollow out" whichever material is the softer. You may have an issue with "contamination" from the resin if the wood's open pored, in which case I'd suggest either an NC sanding sealer or a flood-coat of CA on the timber sections first, to seal those pores. Then dry sanding.
To finish... [gasp!] CA. Once you've built up enough coats that there's no risk of "polishing through" you can lightly wet-sand and/or polish with Brasso as you would normally for resin.
- Andy Mc
-
9th February 2009, 10:55 AM #4
Thanks for that guys, had a go this weekend not to happy with it.
David
-
9th February 2009, 08:44 PM #5
Hey Skew that was almost painless mate lol. But the true professional you are and knowing your preferred method of finishing. You did not discount the use of CA.
-
9th February 2009, 08:56 PM #6
Given the quality of finish our better pen-turners are managing with CA I'm almost tempted to revise my opinion of it.
Almost...
- Andy Mc
-
14th February 2009, 11:18 AM #7
Similar Threads
-
Can't quite get the finish right!
By eurostat in forum FINISHINGReplies: 19Last Post: 16th November 2008, 01:37 PM -
Best Pen Finish?
By funkychicken in forum WOODTURNING - PEN TURNINGReplies: 34Last Post: 14th March 2008, 08:46 AM -
ca finish help!?
By PenTurner in forum WOODTURNING - PEN TURNINGReplies: 40Last Post: 10th March 2007, 05:21 PM -
what finish to use
By Ross W in forum FINISHINGReplies: 1Last Post: 27th March 2006, 12:16 PM -
How can i get this finish?
By leighd in forum FINISHINGReplies: 15Last Post: 21st July 2004, 12:13 AM