my first laser kit

**mkypenturner** · 12th April 2012, 11:26 PM

since doing the market scene a go i decided to assemble a flame laser kit for a sierra

hmmm opened the container and all the bits fell out i thought this is gunna be fun

anyway read the instructions and it went together ok the instructions say that you can turn down to size or just sand ( if your chicken )
ok i decided im gunna take the latter approach then looked at how much had to be taken off , nearly a job for a 40 grit chisel

so turn it i did carefully then finished with 20 coats of CA am so happy with this am going to get some more depending on sales and funds

**PenTurner** · 12th April 2012, 11:39 PM

Certainly looks the part Troy,

Amos

**gawdelpus** · 13th April 2012, 12:07 AM

Hehe ! so much fun it should be illegal lol. It took me about 2 hrs to put together the gear one as everything was in bits including the background ,but as a retired fitter and turner it appealed to me

, Most of these kits seem to be softwoods so not too hard to work with, although the costs mean to be careful hehe. I find the piano keyboard kits do well ,but like anything the right person in the right place at the right time hehe, make sure you have some local timbers in your range as well even slims and streamlines , I try to have a selection of davids australiana in aussie woods ,contrasts with all the other kits hehe .
Cheers ~ John

**Dorno** · 13th April 2012, 12:16 PM

nice

cheers Ian

Thread: my first laser kit

Thread Tools

Search Thread

my first laser kit

Similar Threads

old laser out...new laser in

Re-Gas for laser

Laser Rig in GIS?

Laser

Tags for this Thread

Posting Permissions