Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 5 of 5
-
28th April 2023, 09:37 PM #1Member
- Join Date
- Feb 2023
- Location
- Finger Lakes Area, Central New York State, USA
- Age
- 69
- Posts
- 50
A segmented pen of a diffrent kind
I had a momentary lapse of reason the other day when working on a pen kit. Foe some reason I decided to play Black Sabbath Paranoid on 78 speed and backwards.............. then this fell off my lathe.
The kit is Penn State Crown Jewel in gold Crown Jewel 24kt Gold Twist Pen Kit at Penn State Industries
The wood is olive wood and the finish is 3 coats of spray lacquer.
And yes that is the brass tube showing between the segments. Tube was set in the blank with 30 minute epoxy .
Will see how this goes
calabrese55
IMG_2023-04-25-17-24-02-704.jpgIMG_2023-04-25-17-24-27-937.jpgIMG_2023-04-25-17-24-58-764.jpg
-
28th April 2023 09:37 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
28th April 2023, 09:55 PM #2
That’s different, I like it.
Brad.
-
29th April 2023, 06:12 PM #3
I like it actually I love it , an I think Ozzy would too it’s fantastic.
An in such a great Timber too.
How does it feel using it?.
Cheers Matt.
-
30th April 2023, 07:22 AM #4Member
- Join Date
- Feb 2023
- Location
- Finger Lakes Area, Central New York State, USA
- Age
- 69
- Posts
- 50
Thanks Simplicity for looking in.
The olive wood is quite nice wood bought a bunch of the olive blanks from a company here https://www.bellforestproducts.com.
Not a viable source for you possibly but their web site has some great detail and specifics on all kinds of wood.
Olive turns OK kinda of narly but finishes well . Really smooth after some lacquer finish
Thanks again for your time.
calabrese55
-
30th April 2023, 12:03 PM #5Member
- Join Date
- Feb 2023
- Location
- Finger Lakes Area, Central New York State, USA
- Age
- 69
- Posts
- 50
Hey Ironwood
Thank you for looking in. Yes it is a little different and I am very interested to see if it attracts any real traction in the market place.
I actually do not start out with any specific idea of the finished pen form. Honestly the parts are small enough that if I totally screw up I can start over. I have only built 5 pens at this point but been screwing up good tree lumber for many years.
I did recently spoil a pen / tube assembly and did not have another tube to use. Actually recovered the tube ( epoxy set) by simply turning the wood blank away with a parting tool and sanding back to a smooth finish on the tube. In the back of my mind I think that action spawned the idea that created the segmented pen you see here. Kind of neat how mistakes can somehow work out better....... later .
Thanks again for looking in.
calabrese55
Similar Threads
-
Three of a kind
By Dalboy in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 4th February 2016, 01:24 PM -
My Kind of Day
By Ed Reiss in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 7Last Post: 19th March 2009, 09:52 PM -
Is there anyone who could be so kind?
By Wongdai in forum WOODWORK - GENERALReplies: 11Last Post: 9th January 2009, 09:03 PM -
a bit diffrent
By bowl-basher in forum WOODTURNING - GENERALReplies: 14Last Post: 2nd December 2008, 09:23 PM -
Be Kind To Me, I'm New!!!
By Salted Nuts in forum MISC BOAT RELATED STUFFReplies: 21Last Post: 2nd August 2006, 08:26 PM