Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 12 of 12
Thread: M8.4 x 1 tap wanted
-
13th February 2014, 10:34 PM #1
M8.4 x 1 tap wanted
Anyone out there know where I can source a M8.5 X 1 tap (sierra transmision thread) preferably here in Aus.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
13th February 2014 10:34 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
13th February 2014, 10:43 PM #2
Try Mike Redburn at SilverPenParts I think that's where I got mine from, or it could have been IndyPenDance.
I doubt very much whether you will find one in Oz, unless there is someone willing to sell theirs.
Yes, the Sierra transmission is 8.4x1 as per your thread heading, not 8.5x1 as in your text.
-
14th February 2014, 08:02 AM #3
Just be aware that there are different sized sierra threads as well so depending on source you can get caught out ,there is enough difference that they are not interchangeable ,so if you do get a tap to suit what you have make sure you use the same mechanisms from the same place all the time ( I assume you want to do some bullet pens ? ) cheers ~ John
G'day all !Enjoy your stay !!!
-
14th February 2014, 04:09 PM #4
Thanks Fred and John, yep its for bullet pens. I did see them at SilverPenParts but was hoping to get one locally but I guess not.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
14th February 2014, 04:28 PM #5
These taps are a special order item, as far as I am aware not available from the normal tap and die sources, like the triple thread ones.
I have just tried a thread cut with my 8.4x1 tap with 3 Sierra transmissions, a Rhizeng labelled one (originally purchased from Timberbits), a Timberbits labelled one (one and the same I believe) and a Berea labelled one.
All work fine.
I also have the matching 8.4x1 die, but I don't think I have ever used it. Probably seemed like a good idea at the time.
-
14th February 2014, 09:10 PM #6
Thanks for that info Fred, looks like its the one I need and will have to get it from Silver.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
15th February 2014, 05:49 PM #7
I have at least 3 different Sierra Mechanisms each with different threads it gets very annoying from time to time.
Cheers Ian
-
15th February 2014, 07:42 PM #8
-
15th February 2014, 08:04 PM #9
-
15th February 2014, 08:36 PM #10
I bit the bullet and ordered one from Silver Pen Parts last night.
Regards Rumnut.
SimplyWoodwork
Qld. Australia.
-
15th February 2014, 08:41 PM #11
-
15th February 2014, 09:43 PM #12
Fred ! the rheising ones just go straight in to the standard sierras no thread contact at all I found out when trying to mix and match some other sierras. I have ordered a 8mm X .75 pitch set from the UK to try because there is only a few threads in contact if necessary I can tap with a taper tap till the adapter just fits . I will let you know how it works out in a week or so cheers ~ John
G'day all !Enjoy your stay !!!
Similar Threads
-
A Reason why all WANTED ADS are not in the WANTED SECTION
By skot in forum FORUMS INFO, HELP, DISCUSSION & FEEDBACKReplies: 3Last Post: 16th August 2010, 11:24 AM -
The job is wanted
By andy77 in forum EMPLOYMENTReplies: 1Last Post: 25th February 2008, 07:13 PM -
Wanted to say thanks
By KangaMan in forum WOODTURNING - PEN TURNINGReplies: 2Last Post: 6th September 2006, 09:09 AM