Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 3 of 3
Thread: Needed Something
-
28th July 2014, 10:14 AM #1
Needed Something
These three pens were originally finished some time ago. I do not have any photos how they originally looked like but basically very plain.
Last weekend I finally got around to taking them apart, put them back on the lathe and sanded the finish off. I then added some black/green dye and left them on the bench for a week until i got back into the shed. I sanded them and applied some finish.
Now you are able to see the grain a little bit better.
P1010474.JPG
All comments are welcomed.
-
28th July 2014 10:14 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
28th July 2014, 10:52 AM #2
Hum not sure Christos. But good to see your having a go improving and making the grain stand out.
-
28th July 2014, 03:30 PM #3
Its a bit hard to see in the photos but I think they would have been better left as natural timber.
Similar Threads
-
Help needed with Refurbing Cricket Bats- Advice on Drum Sander + Buffer needed
By Melbourne in forum WOODWORK - GENERALReplies: 23Last Post: 17th April 2014, 10:22 PM -
3/4 Tap and Die Needed - Can you help!
By Milo in forum METALWORK FORUMReplies: 14Last Post: 28th May 2013, 04:21 PM -
Help needed
By toddbron in forum WOODTURNING - GENERALReplies: 26Last Post: 24th September 2011, 06:35 PM -
Help needed...
By Thickasaplank in forum BOAT BUILDING / REPAIRINGReplies: 5Last Post: 22nd November 2007, 09:08 PM -
help needed plz - info needed on turning tools
By theyoungster in forum WOODTURNING - GENERALReplies: 5Last Post: 7th August 2007, 02:31 PM