Thanks: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 11 of 11
Thread: pen turning
-
8th January 2014, 04:27 PM #1Senior Member
- Join Date
- Apr 2009
- Location
- Deloraine
- Posts
- 283
pen turning
hello penturners,
As a bandsaw jewelry box maker & and bowl turner i always said i wouldnt turn pens,but alass i made 1 or 2 and its like when you first go fishing you get hooked and bugger its happend, a question what method do you use to finnish your pens, i am learing to make fancy slimlines 24ct gold and iam sanding through the grits to 12000 eee cream and shellawax glow, suppose it will drive me to make diffrent models john.
-
8th January 2014 04:27 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
8th January 2014, 05:24 PM #2Senior Member
- Join Date
- Aug 2008
- Location
- Canberra
- Posts
- 420
Welcome to the club, they make good presents! Most people ('users') like CA finish on pens. I personally think different timbers benefit from different finishes. I use both CA and EEE/Shellawax for different pens.
CA is good for porous or soft timbers, or when you want shiny finish.
Shellawax gives softer look, and it sometimes brings the timber grain forward. Actually, I use several coats of shellawax with 10 min interval between them, it gives "deeper" looking finish.
-
8th January 2014, 09:37 PM #3
Another one I occasionally use is CA/BLO. This is quicker to apply than straight CA, and gives a less glossy finish, but very durable.
My preferred finish is CA as I like the deep glossy look.
I hope you are familiar with all the abbreviations.Dallas
-
8th January 2014, 11:15 PM #4
hiya John
for starters welcome to the DARK SIDE
with all woods i sand to 320 max, more often i will only use 240 grit paper, i have allergy problems to CA accelerators so i only use the CA/BLO method with medium CA, i find that i can get the deep glossy finish with this method
i don't use shellawax on pens anymore due to wearability, and i can whack 8-10 coats of CA on in under 10 minutes with my method
i do sand the the CA finish after completion with the top 6 pads of micromesh, i very rarely have ridges and if i do i sand it all off and start from scratch
Treecycle if you are having problems getting the deeper finish with this method try some fresh BLO, i found the older stuff doesn't do the job
this is just my method and it took many attempts to work it out on a scrap piece of wood
all the best
MIKNo Result Without Effort
Mecha Blanks now on Facebook - Miks Blanks
Mecha Blanks now Available at Perfect Pens and Pencils
Find me on Facebook - Pens by MIK
-
9th January 2014, 04:29 AM #5
Hi John, yep, it's a slppery slope, but a lot of challenges and enjoyment lie before you . Finishing is really the art of doing what's needed to add to either the protection of the wood, or enhance what may not really show too well in some timbers ,some folks like the "wood feel" others like the shiny "new look" most pen makers start on slims ,but they are a little limited in appeal no matter how well they are made, but don't be fooled by the cheapness of most slim kits,they are as hard to make as any double barreled pen .roller balls,fountain pens ,cigar etc ,but will give a good indication if you have been able to get the fittings to match the metal work at the joins . My first hundred or so slims and streamlines (streamlines are slims with a thicker centre band to give a bit more meat on the pen ) . You will see slims turned in many ways by some, to add thickness some with an "hour-glass" shape or just bulbous ,if you need a bigger pen use a bigger kit hehe. You obviously already have a love of timber work and skills that will help you along the way , it can be as simple or complicated as you want it to be ,you have access to some of our nicest timbers in Tassie ,but a pen has to stand out in a very small space so if you can get Birdseye huon ,it will make a more attractive pen than plain huon , and so on . An easy pen to move up when you are ready (and you will know when) are the sierra types and probably one of the most popular all round ,come in many finishes ,gold chrome gunmetal etc. single barrel to turn and about 1/2 " thick, use parker type refills and are very easy to make . Just follow the path and enjoy the ride Cheers ~ John
G'day all !Enjoy your stay !!!
-
9th January 2014, 07:54 AM #6
John I suggest you turn back now! stop! get rid of all pen making gear!.................I fear its to late the bug has bitten your already talking other kits
Finishes you have started as I did from there I have used WoP, Oils, Lacquer, wax experimant to suit your self. I have never finished a pen in CA I can stand the fumes that much.
-
9th January 2014, 09:27 AM #7
-
9th January 2014, 05:22 PM #8Senior Member
- Join Date
- Apr 2009
- Location
- Deloraine
- Posts
- 283
pen turning
Thank you to the forum members who answered my questions on finishing pens,i think i should sit down and consider my next move. john.
-
9th January 2014, 05:42 PM #9
I have finished my pens with wipe On Poly, medium CA, several coats of medium CA then boiled linseed oil to finish, and also used plastic coat.
I tend to favor the WOP at the moment.
-
10th January 2014, 09:21 AM #10
John, when I started my intention was to turn bowls, but someone at the club suggested I make a pen!! I haven,t turned a bowl yet!!!(even though I want to), The finish is a subjective thing, fun to try various methods, one method rarely used is Danish Oil, would require time between coats, but a very different feel to the CA finish, Amos
Good, better, best, never let it rest;
Til your good is better, and your
better, best.
-
10th January 2014, 09:40 AM #11
I think most people start with slimlines, and quickly go for the sierra, and then on to the larger pens. That was my route too. But a few years ago, I started making pens for the troops out of slimlines. I really liked the look of the euro over the slimline, so I started making my own centerbands more toward the euro. Then I started doing my own finials. Usually with a piece that matched the centerband, or the same wood as the pen. Now the slimline is one of my most favorite kits. But I never do them stock anymore. A slimline has a ton of potential for customizing, without spending a ton of extra time.
As for the finish, I like CA finishes, but CA doesn't like me. I have to wear an organic respirator. But the fumes sometimes get into my sinuses through my eyes (that's what the doctor told me) . I still do a CA finish, but not nearly as often.
Here's a link to a method I've been doing now for several months.
Doctors Wood Shop Pen Finish Tutorial - International Association of Penturners
Similar Threads
-
Turning turning tool handles
By ozhunter in forum WOODTURNING - GENERALReplies: 13Last Post: 27th July 2012, 04:11 AM -
Pen Turning
By PinZano in forum WOODTURNING - PEN TURNINGReplies: 4Last Post: 21st February 2012, 09:44 PM -
A turning job for someone.
By Woodwould in forum WOODTURNING - GENERALReplies: 26Last Post: 23rd August 2008, 10:04 PM -
Lathe turning off center = pens turning off center
By Matt88s in forum WOODTURNING - PEN TURNINGReplies: 20Last Post: 14th March 2008, 04:00 PM -
My First Month turning Pens-- first turning ever
By lubbing5cherubs in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 15th May 2006, 10:38 AM