Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
-
2nd April 2010, 01:05 AM #1New Member
- Join Date
- Jun 2008
- Location
- Brisbane bayside
- Posts
- 7
What pen mill for Gentleman barrels?
I've made some of the slimline pens in the past but now I want to progress to something more classy so bought a couple of gentleman kits.
The question I have is what barrel trimmer is available for the larger tubes of the gentleman pen kits?
I bought one of the combination sets with the four different sized barrel cleaners but none are large enough for the gentleman tubes.
So how do you square up the ends of the larger tubes?
Thanks
Ross
-
2nd April 2010 01:05 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
2nd April 2010, 02:16 AM #2
The diameter of your cutter should be fine ,most likely you will need to make yourself a bush to suit the diameter of the tubes .wood is ok or acrylic ,drill a 1/4 inch hole through an offcut so its long enough to go through the tube, then put it on your pen mandrel and turn till the tube just fits through the tube you want to trim .It is only a guide to stop the cutter moving off square ,if you have a sanding disk you can take most of the excess material off after glueup ,leaving a small amount to take down to the brass with the cutter , Hope that makes sense and helps a bit cheers ~ John
G'day all !Enjoy your stay !!!
-
2nd April 2010, 03:02 AM #3New Member
- Join Date
- Jun 2008
- Location
- Brisbane bayside
- Posts
- 7
Thanks John,
I thought that was likely what I needed to do, thanks for your speedy reply.
Ross
-
6th April 2010, 03:33 PM #4
I use slime line pens that have gone wrong (I have a few) for example I may have had a tear out but the other end is still OK. Just saves using good timber when you have some already waiting for a new lease on life
Cheers Rum Pig
It is easier to ask for forgiveness than permission.
Similar Threads
-
A couple of Gentleman
By corbs in forum WOODTURNING - PEN TURNINGReplies: 15Last Post: 23rd November 2009, 12:09 PM -
Southern Gentleman
By Barry Hicks in forum WOODIES JOKESReplies: 1Last Post: 29th June 2008, 03:07 PM -
Old Gentleman
By munruben in forum WOODIES JOKESReplies: 1Last Post: 29th April 2008, 03:46 PM -
He was one of Nature's Gentleman.
By MajorPanic in forum NOTHING AT ALL TO DO WITH WOODWORKReplies: 36Last Post: 9th April 2005, 06:51 PM