Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 7 of 7
-
13th March 2009, 10:56 AM #1
Stainlees Steel , twist pen for a vet (90% no kit)
was asked to make a pen for a vet ( Animal Ark ) that had to be smooth so it could be sterilized ,
317 stanless was drilled out and Tapped to accept the twist action mecanizem (no tubes ),
i only used the ink , spring and the twist mecanizim , 90% no kit
still needs a final polish on the wax wheel ( just before i hand it over )how come a 10mm peg dont fit in a 10mm hole
-
13th March 2009 10:56 AM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
13th March 2009, 10:59 AM #2SENIOR MEMBER
- Join Date
- Sep 2008
- Location
- Maryvale, Queensland
- Posts
- 2,338
Clever. Sure is shiny. Where's the twist? Under the glare?
Russell.Pen Affair Craft Supplies - Cheapest Pearl Ex & Pemo Polymer Clay in Australia
http://craftsupplies.penaffair.com
-
13th March 2009, 11:05 AM #3
-
13th March 2009, 11:08 AM #4SENIOR MEMBER
- Join Date
- Sep 2008
- Location
- Maryvale, Queensland
- Posts
- 2,338
Oh I see it now - didn't look close enough. Indicates a nice fit though
Russell.Pen Affair Craft Supplies - Cheapest Pearl Ex & Pemo Polymer Clay in Australia
http://craftsupplies.penaffair.com
-
13th March 2009, 11:17 AM #5
Sds
Last year we had our two dogs sterilised, looking at your pen I failed to see the necessary apendages to remove.
Now your pen first we have Skiprat the master of the used SS Bolt pens then the Reo steel Pen and now the Stainless pen to be sterilised by the vet, WOW the sky is the limit, I feel I added to the spirit of the occasions with my three brass dart body Slimline and multi faceted woodpens as well. Bring on the innovations. The vet will be pleased and the pen will get over it as time heals all things.
Regards Peter.
-
13th March 2009, 01:56 PM #6
That 316 is a bit hard on drills hehe, Only problem I can think of is the ink will have to be removed before sterilising , and the heat may melt the prepacked grease in the activater ,may be a problem,If you did another maybe use one of the screw out activaters like in the sierras.I think that you rose to the challenge exceptionally well!
G'day all !Enjoy your stay !!!
-
13th March 2009, 04:33 PM #7
i like what you have done, whats next in these metal pens
Similar Threads
-
a carveing with a twist
By SPIRIT in forum WOODCARVING AND SCULPTUREReplies: 2Last Post: 13th January 2008, 09:34 PM -
The new (un)twist(ed) drill bit!
By floobyduster in forum HAND TOOLS - POWEREDReplies: 12Last Post: 10th November 2007, 09:01 PM -
A new twist on a slimline
By macca2 in forum WOODTURNING - PEN TURNINGReplies: 5Last Post: 18th July 2007, 11:56 AM -
Barley twist?
By ugly in forum WOODWORK - GENERALReplies: 3Last Post: 1st June 2005, 08:21 PM -
Triton Steel Cutter and DIY steel tubes
By Intheshed in forum TRITON / GMCReplies: 51Last Post: 6th January 2005, 12:56 AM