Likes Likes:  0
Needs Pictures Needs Pictures:  0
Picture(s) thanks Picture(s) thanks:  0
Results 1 to 5 of 5
  1. #1
    Join Date
    Nov 2010
    Location
    Gippsland Victoria
    Posts
    706

    Default Stylus for tablets and phones. Plastic disc tips.

    Hello,

    Am keen to have a go at making some tablet styluses (stele ? styli ?) for gifts.

    Am thinking might look interesting if I cut a thread and wrap/inlay some thick copper wire in the thread, then turn it down again so that it is all one cylindrical flush surface. The copper wire will also give the connection to the tip for the change in capacitance to be enabled in the tablet/phone. Might take some mucking about to get that working. Not sure.

    Tablet_Stylus.jpg

    Was wondering where I could buy a packet of 20 or so of these little plastic discs for the tips - see photo. In my google searches I can only find the plastic discs already attached to stalks (expensive), or they come as a spare part if you order the whole stylus.

    Any proper keywords I should be using to find the bare plastic discs please ? Or alternately does anyone have a supplier for the plastic discs ? There is approx 1.5mm ball on the tip of the stylus and that slips into a stem with a hole in it on the back of the disc. Would be possible but awkward and tedious to make from rods or scraps of clear plastic like perspex or acrylic.

    Bill
    Attached Images Attached Images

  2. # ADS
    Google Adsense Advertisement
    Join Date
    Always
    Location
    Advertising world
    Posts
    Many





     
  3. #2
    Join Date
    Nov 2004
    Location
    Redlands area, Brisbane
    Posts
    1,490

    Default

    I found these:

    https://www.amazon.com.au/Mixoo-Repl.../dp/B073GRC6FF

    The search terms I used were these: capacitive stylus replacement tip disc

  4. #3
    Join Date
    Nov 2010
    Location
    Gippsland Victoria
    Posts
    706

    Default

    Thanks Mark,

    I know from past experience that the plastic tips can fall off the stalks and be a pain to find again. At $7 a replacement for the entire stalk+disc that's a tadge expensive for me.

    I was hoping to be able to buy a box of only the discs and include 5 discs with each stylus to cater for losing a disc.

    All my searches yielded similar results to what you found. Either 5 expensive discs on stalks or you can get a couple of spare disc if you buy the whole stylus. Was wondering how to get a small boxfull of the clear plastic discs. I will trawl the pen turning suppliers to see what they call them. I'll carry on googling.

    Bill

  5. #4
    Join Date
    Aug 2007
    Location
    Saskatoon, SK, Canada.
    Posts
    1,439

    Default

    Out of curiosity I typed Mark's search term into Alibaba and there is a seller or two with them. The MOQ is 500 which works out to 30 cents US each. You are all set if you plan on making a lot or selling little baggies of them to other turners. You can poke around the site more to see if anyone has a smaller MOQ.

    High Precision Replacement Disc Tip New Version Disc Stylus - Buy Stylus Disc Tip,Touch Pen Disc,High Precision Replacement Disc Tip Nib Product on Alibaba.com

    Aliexpress has some too. Maybe a little more palatable.

    10pcs/lot Capacitive Stylus Pens Touch Screen pen Fine Point Disc Mesh Tip Replaceable apple pencil стилус ipad pro 1 2 3 Touch|Mobile Phone Stylus| - AliExpress

    Pete

  6. #5
    Join Date
    Nov 2010
    Location
    Gippsland Victoria
    Posts
    706

    Default Alibexpress looking good

    Thanks very much for the help.

    The Aliexpress link from QC looks promising and wasnt showing up in my google searches. Better prices than I was finding.

    So thanks again and in future I will use the inbuilt searches in Alibaba and bangood etc. rather than just rely on google, ebay and amazon

    Discs only

    Discs and stalks

    This will be a good test of current status of international postage systems.

    Thanks again.

    Bill

Similar Threads

  1. Sherwood 6 x 9in Belt/Disc Sander - trimming the disc velco backing?
    By Wanderanwills in forum GENERAL & SMALL MACHINERY
    Replies: 2
    Last Post: 26th March 2019, 03:25 PM
  2. Tips for Machining PVC Plastic
    By Jarh73 in forum METALWORK FORUM
    Replies: 10
    Last Post: 26th June 2013, 09:02 AM
  3. GPS on iPad or Android type tablets
    By Big Shed in forum MOTOR HOMES, CARAVANS & CAMPING
    Replies: 39
    Last Post: 15th July 2012, 07:16 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •