As FenceFurniture says, I do indeed use mine a lot. A very great deal.
i love my router setup now. It uses the Incra fence, wonderfence, Incra lifter and motor with external variable speed from PWS. Underneath is a simple box that encloses the lot. It has a large hole in one side in which I jam the 6" hose. The box has a few extra 50mm holes here and there to allow extra airflow and turbulence. This is because the router lifter holes are restricted. The extra holes let the 6" pipe suck it all up.
the router lifter uses the magnetic pop-in plates and I pretty much always just use the most open one. The after market Incra pop-ins that have the extra holes for airflow work fantastically. Truly.
when using the wonderfence, I just jam a 50mm grey flex in the back, which goes straight into the box below. I don't use the 90 degree elbow, it just gets in the way.
the suction from within the box below is enough to capture everything that is generated. The lifter holes capture most and the gap in the fence gets the rest. I did remove the front blanking plate, but it collected less, so it's back on now.
after a long session there may be the odd particle left, but considering how much it's used in a day the remnant is trivial.
i use the router table on every single job I do.