Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 9 of 9
Thread: Incra WONDERFENCE37 question
-
26th October 2014, 11:35 PM #1
Incra WONDERFENCE37 question
Hi, I am thinking of purchasing the Incra WONDERFENCE37 Wonder Fence Router Table Fence
Does anyone know if it will work on the router table posted in the picture that I recently made.
All the photos of the Incra fence in question do not show the back of the fence.
The tracks on the router table is 645mm apart.
Les
-
26th October 2014 11:35 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Age
- 2010
- Posts
- Many
-
27th October 2014, 12:41 AM #2
You could easily mount it to your router table, via the t slots,
with a couple of right angle brackets. The fence comes with clamps to hold it to the edge of the table.Those were the droids I was looking for.
https://autoblastgates.com.au
-
27th October 2014, 08:56 PM #3
Thanks. I just needed to be sure that the 645mm distance between t-slots is less than the length of the fence (by a margin of at least 100mm to be able to mount the right angle brackets and also that the back of the fence had the slots to fix the right angle brackets to.
Les
-
27th October 2014, 09:11 PM #4
http://www.incra.com/manuals/wf_manual.pdf
Page 11 shows 2x T slots on the back and I think the fence is 32" (800mm) wide.Those were the droids I was looking for.
https://autoblastgates.com.au
-
27th October 2014, 11:26 PM #5
Thanks for that. The manual shows what I need to know.
Regards
Les
-
29th October 2014, 09:09 AM #6
So your going for the wonderfence without using the LSPositioner?
…..Live a Quiet Life & Work with your Hands
-
30th October 2014, 04:24 PM #7
Yes. I do not make joints on the router table. More for grooving, profiling etc - doors.
I use Leigh jig for dovetails, box joints and domino for m&t.
Easy enough to set a fence. It will be an upgrade from the Triton router table.
I have put the top on a cabinet, similar to what Norm has done on the NYW.
Les
-
30th October 2014, 05:56 PM #8
Cool, I'll watch with interest. I'm trying to decide what to do about a router table. Freestanding or built into the saw bench and how complicated or accurate the fence and all needs to be.
I have the really early triton router table.…..Live a Quiet Life & Work with your Hands
-
15th March 2015, 04:20 PM #9
Have a look at https://www.woodworkforums.com/f20/router-table-built-193332 to see my new router table.
Les
Similar Threads
-
INCRA I-box Setup Question
By vdotmatrix in forum BOX MAKINGReplies: 2Last Post: 6th April 2015, 03:02 PM -
Another question on Incra Mitre 1000HD
By Arron in forum INCRA JIGSReplies: 3Last Post: 28th December 2012, 08:13 AM -
incra 1000se question
By akuntz in forum INCRA JIGSReplies: 5Last Post: 2nd December 2012, 01:55 PM -
Incra TS-LS question (for someone who actually owns one!)
By socratous in forum INCRA JIGSReplies: 3Last Post: 14th December 2010, 06:42 PM -
Dumb question about Incra jigs
By sbolton in forum INCRA JIGSReplies: 6Last Post: 18th December 2007, 11:49 PM