Thanks: 0
Likes: 0
Needs Pictures: 0
Picture(s) thanks: 0
Results 1 to 4 of 4
Thread: Where is my micro FIXED
-
20th February 2012, 04:29 PM #1
Where is my micro FIXED
I want to make another thread becuase I was sure if anyone would go back and take a second look. I'm excited that it worked out.
I have a INCRA 17 inch and yes I have a manual, trouble is sometimes I have to read it over and over until I can get my head around it.
In this case I just couldn't find it. Finally I sat down with the manual and read it carefully and there it was on the last page (14 and 15) under the heading ADJUSTMENTS It said "adjusting the clamping pressure"
I loosened the Allen screw and pulled out what looked like a small white paper like shim about square about 1x1.
The kit comes with a couple of shims just for this. Package L-22 says clamping shims. Never saw it I swear.
Well I didn't know for sure if it needed to add shims or If I needed to take some out, so I removed the white shim that was in there, put it back together an wal la ! It works like a champ now. It said it was factory set when I got it but mine must have slipped by.
Hope this helps if someone else encounter it.
-
20th February 2012 04:29 PM # ADSGoogle Adsense Advertisement
- Join Date
- Always
- Location
- Advertising world
- Posts
- Many
-
22nd February 2012, 12:45 PM #2
Good for you hexhead
-
22nd February 2012, 04:54 PM #3New Member
- Join Date
- Feb 2012
- Location
- U.S.
- Posts
- 3
Good for Hex!
Gary
-
23rd February 2012, 08:08 AM #4
thanks Gary I needed that.
Similar Threads
-
Bolger Micro as art
By pindimar in forum MISC BOAT RELATED STUFFReplies: 0Last Post: 19th February 2010, 08:08 PM -
Micro Mesh
By GC in forum WOODTURNING - GENERALReplies: 5Last Post: 24th November 2009, 11:31 PM -
Micro Jig Taper Jig
By Jack E in forum HAND TOOLS - POWEREDReplies: 3Last Post: 20th March 2005, 07:44 AM -
Micro$oft
By Grue in forum WOODIES JOKESReplies: 1Last Post: 28th November 2003, 01:39 PM -
Micro Tools
By minis4meau in forum WOODTURNING - GENERALReplies: 6Last Post: 24th January 2002, 09:36 PM